Strength and durability of roller compacted concrete with different types and addition rates of polypropylene fibers

Authors

  • Ismail Kilic Kirklareli University, Faculty of Engineering, Department of Civil Engineering, 39100 (Turkey)
  • Saadet Gokce Gok Kirklareli University, Faculty of Engineering, Department of Civil Engineering, 39100 (Turkey)

DOI:

https://doi.org/10.7764/RDLC.20.2.205

Keywords:

concrete road, durability properties, fiber, mechanical properties, roller compacted concrete

Abstract

Roller compacted concrete (RCC) is a relatively new alternative construction material that can be used in road and dam constructions by allowing rapid use after production and the use of conventional building materials in production. RCC, which can be produced with low water/cement ratio, is one of the rigid road pavement types and shows similarity to flexible road pavements with the production technique. Different types of fibers such as steel and polypropylene (PP) are used in concrete roads with the aim of preventing cracks, reducing the pavement thickness and increasing the permissible joint gap. In this study, flexural strength, compressive strength, unit weight, water absorption, ultrasonic pulse velocity, modulus of elasticity and freeze-thaw resistance were determined in roller compacted concretes produced by using two different polypropylene-based fibers. In RCC design, fiber addition was insufficient to improve concrete properties in terms of strength and durability. It has been observed that there was a 14.4% reduction in compressive strength with 0.20% fiber inclusion, and a 46.8% reduction in compressive strength with 0.50% fiber inclusion. Polypropylene fiber inclusion increased the water absorption percentages and decreased the specific weights of fiber reinforced roller compacted concretes. However, roller compacted concretes produced with PP-fiber exhibited a good performance under freeze-thaw attack.

Downloads

Download data is not yet available.

References

Adamu, M., Mohammed, B. S., & Shahir Liew, M. (2018). Mechanical properties and performance of high volume fly ash roller compacted concrete containing crumb rubber and nano silica. Construction and Building Materials, 171, 521–538. https://doi.org/10.1016/j.conbuildmat.2018.03.138

ACI Committee 327. (2014). Guide to Roller-Compacted Concrete Pavements (ACI 327R-14), Farmington Hills, MI: American Concrete Institute.

Algin, Z., Mermerdas, K., & Zeynepli, M. S. (2019). The effect of macro synthetic fiber on optimum water content and strength properties of Roller Compacted Concrete. OHU J. Eng. Sci. 8(2): 992-1004. https://doi.org/10.28948/ngumuh.534055

ASTM C 597. (2002). Standard test method for pulse velocity through concrete, American Society for Testing and Materials, ASTM International, USA.

ASTM C 1116/C 1116M-10a. (2015). Standard specification for fiber-reinforced concrete, American Society for Testing and Materials, ASTM International, USA.

ASTM C 1435. (2014). Standard practice for molding Roller-Compacted Concrete in cylinder molds using a vibrating Hammer, American Society for Testing and Materials, ASTM International, USA.

Benouadah, A., Beddar, M., & Meddah, A. (2017). Physical and mechanical behaviour of a roller compacted concrete reinforced with polypropylene fiber. Journal of Fundamental and Applied Sciences, 9(2), 623. https://doi.org/10.4314/jfas.v9i2.1

BSI. (2011). Methods of Test for Masonry Units Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units (EN 772-11). BSI Stand. Publ., London, UK.

Chi, M., & Huang, R. (2014). Effect of circulating fluidized bed combustion ash on the properties of roller compacted concrete. Cement and Concrete Composites, 45, 148–156. https://doi.org/10.1016/j.cemconcomp.2013.10.001

Harrington, D., Abdo, F., Adaska, W., Hazaree, C. Ceylan, H., & Bektas, F. (2010). Guide for Roller Compacted Concrete Pavements, National Concrete Pavement Technology Center, Institute for Transportation, Iowa State University.

Hejazi, S. M., Abtahi, S. M., & Safaie, F. (2016). Investigation of thermal stress distribution in fiber-reinforced roller compacted concrete pavements. Journal of Industrial Textiles, 45(5), 896–914. https://doi.org/10.1177/1528083714542827

Jingfu, K., Chuncui, H., & Zhenli, Z. (2009). Strength and shrinkage behaviors of roller-compacted concrete with rubber additives. Materials and Structures/Materiaux et Constructions, 42(8), 1117–1124. https://doi.org/10.1617/s11527-008-9447-x

Karahan, O., Durak, U., Ilkentapar, S., Atabey, I.I., & Atis, C.D. (2019). Resistance of polypropylene fibered mortar to elevated temperature under different cooling regimes. Revista de La Construcción, 18(2), 386–397. https://doi.org/10.7764/rdlc.18.2.386

KGM. (2016). "Turkish Technical Specification for Concrete Pavements", Turkish General Directorate of Highways, Ankara.

Khayat, K. H., Libre, N. A., & Wu, Z. (2019). Roller compacted concrete for rapid pavement construction. Technical Report.

Kolase, P. K., & Desai, A. K. (2019). Experimental study on monotonic and fatigue behaviour of polypropylene fibre-reinforced roller-compacted concrete with fly ash. Road Materials and Pavement Design, 20(5), 1096–1113. https://doi.org/10.1080/14680629.2018.1436466

Kumar, V. D. R., KrishnaRao, S, & Panduranga Rao, B. (2013). A Study on Properties of Steel Fibre Reinforced Roller Compacted Concrete. International Journal of Engineering Sciences & Emerging Technologies, 6(2), 221-227.

LaHucik, J., Dahal, S., Roesler, J., and Amirkhanian, A. N. (2017). Mechanical properties of roller compacted concrete with macro-fibers. Construction and Building Materials, 135, 440-446.

Lee, S. K., Jeon, M. J., Cha, S. S., & Park, C. G. (2017). Mechanical and permeability characteristics of latex-modified fiber-reinforced roller-compacted rapid-hardening-cement concrete for pavement repair. Applied Sciences (Switzerland), 7(7), 694. https://doi.org/10.3390/app7070694

Lin, Y., Karadelis, J. N., & Xu, Y. (2013). A new mix design method for steel fibre-reinforced, roller compacted and polymer modified bonded concrete overlays. Construction and Building Materials, 48, 333–341. https://doi.org/10.1016/j.conbuildmat.2013.06.020

Manica, G., Bolina, F., Tutikian, B., & Valadares, M. (2019). Analysis of the resistance to fire of solid concrete boards with polypropylene microfibers and long curing time. Revista de La Construcción, 18(3), 595–602. https://doi.org/10.7764/RDLC.18.3.595

Mardani-Aghabaglou, A., Andic-Çakir, O., & Ramyar, K. (2013). Freeze-thaw resistance and transport properties of high-volume fly ash roller compacted concrete designed by maximum density method. Cement and Concrete Composites, 37(1), 259–266. https://doi.org/10.1016/j.cemconcomp.2013.01.009

Meddah, A., Beddar, M., & Bali, A. (2014). Use of shredded rubber tire aggregates for roller compacted concrete pavement. Journal of Cleaner Production, 72, 187–192. https://doi.org/10.1016/j.jclepro.2014.02.052

Modarres, A., & Hosseini, Z. (2014). Mechanical properties of roller compacted concrete containing rice husk ash with original and recycled asphalt pavement material. Materials and Design, 64, 227–236. https://doi.org/10.1016/j.matdes.2014.07.072

Nanni, A. (1989). Properties and Design of Fiber Reinforced Roller Compacted Concrete, Transportation Research Record 1226, pp 61-68.

Neocleous, K., Angelakopoulos, H., Pilakoutas, K., & Guadagnin, M. (2011). Fibre-reinforced roller compacted concrete transport pavements. Proceedings of the Institution of Civil Engineers: Transport, 164(2), 97–109. https://doi.org/10.1680/tran.9.00043

Neocleous, K., Pilakoutas, K., Graeff, A., & Koutselas, K. (2011). Steel Fibre Reinforced Roller-Compacted Pavements: Research and Practical Experience. In 2nd International Conference on Best Practices for Concrete Pavements (pp. 1–12). Retrieved from https://www.researchgate.net/publication/282407268

Ozturk, O., Ozyurt, N., & Atahan, H. N. (2019). Roller Compacted Concrete Mix Design and Mechanical Properties. 10th International Concrete Congress, May 02-04, Bursa, Turkey, pp 277-287. Retrieved from http://betonkongresi.imo.org.tr/pdf/Kitap.pdf

Rooholamini, H., Hassani, A., & Aliha, M. R. M. (2018). Fracture properties of hybrid fibre-reinforced roller-compacted concrete in mode I with consideration of possible kinked crack. Construction and Building Materials, 187, 248–256. https://doi.org/10.1016/j.conbuildmat.2018.07.177

Sukontasukkul, P., Chaisakulkiet, U., Jamsawang, P., Horpibulsuk, S., Jaturapitakkul, C., & Chindaprasirt, P. (2019). Case investigation on application of steel fibers in roller compacted concrete pavement in Thailand. Case Studies in Construction Materials, 11, e00271. https://doi.org/10.1016/j.cscm.2019.e00271

TCMA, (2017). “Turkish Technical Specification for Roller Compacted Concrete (RCC) Pavements”, Ankara

TCMA, (2018). “Design Guide for Roller Compacted Concrete Pavements”, Ankara

TS 802, (2016). "Design Concrete Mixes”, Turkish Standards Institution, Ankara

TS EN 12350-2, (2019). “Testing fresh concrete - Part 2: Slump-test”, Turkish Standards Institution, Ankara

TS EN 12350-3, (2019). “Testing fresh concrete - Part 3: Vebe test”, Turkish Standards Institution, Ankara

TS EN 12390-3, (2003). “Testıng hardened concrete-Part 3: Compressive strength of test specimens”, Turkish Standards Institution, Ankara

TS EN 12390-5, (2002). “Testing hardened concrete - Part 5: Flexural strength of test specimens”, Turkish Standards Institution, Ankara

Topličić-Ćurčić, G., Grdić, D., Ristić, N., & Grdić, Z. (2015). Properties, materials and durability of roller compacted concrete for pavements. Zaštita materijala, 56(3), 345-353.

Url-1 <https://atlas1.com.tr/>, date retrieved 07.11.2019

Url-2<https://www.proceq.com/uploads/tx_proceqproductcms/import_data/files/Pundit%20PL-2_Sales%20Flyer_English_high.pdf>, date retrieved 07.11.2019

Wang, C., Chen, W., Hao, H., Zhang, S., Song, R., & Wang, X. (2018). Experimental investigations of dynamic compressive properties of roller compacted concrete (RCC). Construction and Building Materials, 168, 671–682. https://doi.org/10.1016/j.conbuildmat.2018.02.112

Wang, X. hua, Zhang, S. rong, Wang, C., Liu, F. cun, Song, R., & Wei, P. yong. (2018). Initial damage effect on dynamic compressive behaviors of roller compacted concrete (RCC) under impact loadings. Construction and Building Materials, 186, 388–399. https://doi.org/10.1016/j.conbuildmat.2018.07.141

Yaman, I. O., Ceylan, H. (2015). "Roller Compacted Concrete Pavements", TMH 480, 60/2015-4, pp 44-61.

Downloads

Published

2021-08-19

How to Cite

Kilic, I., & Gokce Gok, S. (2021). Strength and durability of roller compacted concrete with different types and addition rates of polypropylene fibers. Revista De La Construcción. Journal of Construction, 20(2), 205–214. https://doi.org/10.7764/RDLC.20.2.205