Dynamic responses of reinforced concrete slabs under sudden impact loading
DOI:
https://doi.org/10.7764/RDLC.20.2.346Keywords:
drop test setup, impact loading, measurement devices, numerical analysis, rc slabAbstract
Reinforced concrete (RC) slabs may be subjected to low-velocity impact effect in their service lives. In this study, it is aimed to investigate dynamic responses of two-way rc slabs. So, a total of 6 slabs with 500x500, 550x550 and 600x600 mm side lengths and having same thickness are both experimentally and numerically investigated under low velocity impact loading. Two different reinforcement configurations are used in the production of each slab. A drop test setup is designed for the experimental study. Besides, measurement devices such as accelerometer, lvdt, dynamic load cell, data logger and optic photocells are used in the experimental program. Experiments on the specimens are carried out for the same level of impact energy. Acceleration, displacement and impact load values of slabs are presented by time dependent graphs. In addition, cracks and deformations are observed during tests. In the numerical part of this study, a detailed finite element procedure where explicit dynamic analysis is performed by Abaqus finite elements software is established. The simulations are performed for each test specimen under impact effect and analysis results are used in the verification of experimental results. The relationship between experimental and numerical studies is comparatively examined in terms of crack patterns and average ratios of accelerations, displacements, impact loads. Finally, it is considered that the proposed numerical model could be used in the evaluation of experimental results under impact loading.
Downloads
References
Al-Rousan, R. Z., Alhassan, M. A., & Al-Salman, H. (2017). Impact resistance of polypropylene fiber reinforced concrete two-way slabs. Structural Engineering and Mechanics, 62(3), 373-380. https://doi.org/10.12989/sem.2017.62.3.373
Anil, Ö., Yilmaz, M. C., & Barmaki, W. (2020). Experimental and numerical study of rc columns under lateral low-velocity impact load. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 173(8), 549-567. https://doi.org/10.1680/jstbu.18.00041
Anil, Ö., & Yilmaz, T. (2015). Low velocity impact behavior of shear deficient RC beam strengthened with cfrp strips. Steel and Composite Structures, 19(2), 417-439. http://dx.doi.org/10.12989/scs.2015.19.2.417
Abaqus User’s Manual, Version 6.12. (2015). SIMULIA, Dassault Systèmes Simulia Corp.
ASTM E23-00. (2002). Standard test methods for notched bar impact testing of metallic materials. ASTM International, West Conshohocken, PA. https://doi.org/10.1520/E0023-00
Chakradhara R. M., Bhattacharyya, S. K., & Barai, S. V. (2011). Behaviour of recycled aggregate concrete under drop weight impact load. Construction and Building Materials, 25(1), 69-80. https://doi.org/10.1016/j.conbuildmat.2010.06.055
Delhomme, F., Mommessin, M., Mougin, J. P., & Perrotin, P. (2007). Simulation of a block impacting a reinforced concrete slab with a finite element model and a mass-spring system. Engineering Structures, 29(11), 2844-2852. https://doi.org/10.1016/j.engstruct.2007.01.017
Erdem, R. T. (2014). Prediction of acceleration and impact force values of a reinforced concrete slab. Computers and Concrete, 14(5), 563-575. https://doi.org/10.12989/cac.2014.14.5.563
Erdem, R. T., & Gücüyen, E. (2017). Non-linear analysis of reinforced concrete slabs under impact effect. Gradjevinar, 69(6), 479-487. https://doi.org/10.14256/JCE.1557.2016
Erdem, R. T., Gücüyen, E., Kantar, E., & Bağcı, M. (2015). Impact effect on different sized reinforced concrete specimens. Indian Journal of Engineering and Materials Sciences, 22(5), 597-603.
Hrynyk, T. D., & Vecchio, F. J. (2014). Behavior of steel fiber-reinforced concrete slabs under impact load. ACI Structural Journal, 111(5), 1213-1224. https://doi.org/10.14359/51686923
Iqbal, M. A., Kumar, V., & Mittal, A. K. (2019). Experimental and numerical studies on the drop impact resistance of prestressed concrete plates. International Journal of Impact Engineering, 123, 98-117. https://doi.org/10.1016/j.ijimpeng.2018.09.013
Kishi, N., Kurihashi, Y., Khasraghy, S. G., & Mikami, H. (2011). Numerical simulation of impact response behavior of rectangular reinforced concrete slabs under falling-weight impact loading. Applied Mechanics and Materials, 82, 266-271. https://doi.org/10.4028/www.scientific.net/AMM.82.266
Kosteski, L. E., Riera, J. D., Iturrioz, I., Singh, R. K., & Kant, T. (2015). Analysis of reinforced concrete plates subjected to impact employing the truss-like discrete element method. Fatigue and Fracture of Engineering Materials and Structures, 38(3), 276–289. https://doi.org/10.1111/ffe.12227
Lerner, L. R., Ott, M. J., Führ, L. M., Ehrenbring, H. Z. E., Pacheco, F., & Tutikian, B. F. (2020). Influence of the molding process and different surface regularization methods on the compressive strength of concrete specimens. Revista de La Construcción. Journal of Construction, 19(1), 159-169. https://doi.org/10.7764/rdlc.19.1.159-169
Li, C., Hao, H., & Bi, K. (2017). Numerical study on the seismic performance of precast segmental concrete columns under cyclic loading. Engineering Structures, 148, 373-386. https://doi.org/10.1016/j.engstruct.2017.06.062
Mander, J. B., Priestley, M. J. N., & Park, R. (1988). Theoretical Stress‐Strain Model for Confined Concrete. Journal of Structural Engineering, 114(8), 1804-1826. https://doi.org/10.1061/(asce)0733-9445(1988)114:8(1804)
Mokhatar, S. N., Abdullah, R., & Kueh, A. B. H. (2013). Computational impact responses of reinforced concrete slabs. Computers and Concrete, 12(1), 37-51. https://doi.org/10.12989/cac.2013.12.1.037
Mokhatar, S. N., & Abdullah, R. (2012). Computational analysis of reinforced concrete slabs subjected to impact loads. International Journal of Integrated Engineering, 4(2), 70-76.
Obaidat, Y. T., Heyden, S., & Dahlblom, O. (2010). The effect of CFRP and CFRP/concrete interface models when modelling retrofitted RC beams with FEM. Composite Structures, 92(6), 1391-1398. https://doi.org/10.1016/j.compstruct.2009.11.008
Othman, H., & Marzouk, H. (2016). An experimental investigation on the effect of steel reinforcement on impact response of reinforced concrete plates. International Journal of Impact Engineering, 88, 12-21. https://doi.org/10.1016/j.ijimpeng.2015.08.015
Othman, H., & Marzouk, H. (2017). Finite-element analysis of reinforced concrete plates subjected to repeated impact loads. Journal of Structural Engineering, 143(9), 1-16. https://doi.org/10.1061/(asce)st.1943-541x.0001852
Ranjith, B. B., & Thenmozhi, R. (2021). Experimental and numerical studies on punching shear strength of concrete slabs containing sintered fly ash aggregates. Revista de la Construcción. Journal of Construction, 20(1), 15-25. https://doi.org/10.7764/RDLC.20.1.15
Tai, Y. S., & Tang, C. C. (2006). Numerical simulation: The dynamic behavior of reinforced concrete plates under normal impact. Theoretical and Applied Fracture Mechanics, 45(2), 117-127. https://doi.org/10.1016/j.tafmec.2006.02.007
Xiao, Y., Li, B., & Fujikake, K. (2017). Behavior of reinforced concrete slabs under low-velocity impact. ACI Structural Journal, 114(3), 643–658. https://doi.org/10.14359/51689565
Xu, X., Ma, T., & Ning, J. (2019). Failure mechanism of reinforced concrete subjected to projectile impact loading. Engineering Failure Analysis, 96, 468-483. https://doi.org/10.1016/j.engfailanal.2018.11.006
Yılmaz, T., Kıraç, N., Anil, Ö., Erdem, R. T., & Sezer, C. (2018). Low-velocity impact behaviour of two way RC slab strengthening with CFRP strips. Construction and Building Materials, 186, 1046-1063. https://doi.org/10.1016/j.conbuildmat.2018.08.027
Zineddin, M., & Krauthammer, T. (2007). Dynamic response and behavior of reinforced concrete slabs under impact loading. International Journal of Impact Engineering, 34(9), 1517-1534. https://doi.org/10.1016/j.ijimpeng.2006.10.012
