Effects of glass fiber reinforced polymer pipe waste powder usage on concrete properties
DOI:
https://doi.org/10.7764/RDLC.20.3.463Keywords:
waste powder, GFRP, pipe waste, mechanical properties, workability, recycling, recoveryAbstract
In this study, the recycling of pipe waste powder in concrete has been experimentally investigated to reduce its harm to the environment and human health. Glass fiber reinforced polymer pipe waste powder (GFRP-WP) reveals during the production of additional coupling and bends of GFRP pipes produced for clean water and wastewater systems. GFRP-WP is composed of polyester resin, sand, and E-glass fiber. GFRP-WP was used as a partial replacement to fine aggregate in proportions of 0% 5%, 10%, 20%, 30% and 40% to the concrete mixture. The effect of GFRP-WP was examined on the physical and mechanical properties of concrete, such as compressive strength, workability, capillarity, and water absorption. According to the results, it was seen that GFRP-WP could be used as filler in concrete, and some positive and negative effects on concrete were also determined. GFRP-WP reduced the workability of concrete. Therefore, GFRP-WP impaired the properties of the concrete if certain mixing ratios were exceeded. It was determined that GFRP-WP could be used in concrete up to 15% by volume as a partial replacement for fine aggregate.
Downloads
References
Asokan, P., Osmani, M., & Price, A. (2010). Improvement of the mechanical properties of glass fibre reinforced plastic waste powder filled concrete. Construction and Building Materials, 24(4), 448–460. https://doi.org/10.1016/j.conbuildmat.2009.10.017
Asokan, P., Osmani, M., & Price, A. D. F. (2009). Assessing the recycling potential of glass fibre reinforced plastic waste in concrete and cement compo-sites. Journal of Cleaner Production, 17(9), 821–829. https://doi.org/10.1016/j.jclepro.2008.12.004
Aydin, F., & Saribiyik, M. (2013). Investigation of flexural behaviors of hybrid beams formed with GFRP box section and concrete. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2012.12.060
Bağriaçik, B., Beycioğlu, A., Topolinski, S., Akmaz, E., Sert, S., & Güner, E. D. (2021). Assessment of glass fiber-reinforced polyester pipe powder in soil improvement. Frontiers of Structural and Civil Engineering. https://doi.org/10.1007/s11709-021-0732-x
Bağrıaçık, B., Yıldırım, Z. B., Güner, E. D., & Beycioğlu, A. (2020). Assessment of pipe powder in soil improvement applications: an optimization by response surface methodology. Arabian Journal of Geosciences. https://doi.org/10.1007/s12517-020-05962-y
Beycioğlu, A., Kaya, O., Yıldırım, Z. B., Bağrıaçık, B., Dobiszewska, M., Morova, N., & Çetin, S. (2020). Use of GRP pipe waste powder as a filler replacement in hot-mix asphalt. Materials. https://doi.org/10.3390/ma13204630
Bhadra, J., Al-Thani, N., & Abdulkareem, A. (2017). Recycling of polymer-polymer composites. In Micro and Nano Fibrillar Composites (MFCs and NFCs) from Polymer Blends (pp. 263–277). https://doi.org/10.1016/B978-0-08-101991-7.00011-X
Bhushan, B., Lalotra, S., & Bhardwaj, S. (2019). Experimental Study on the Mechanical Properties of Glass Powder and Marble Dust Concrete. Interna-tional Journal of Recent Research Aspects, 6(4), 23–29.
Bisht, K., & Ramana, P. V. (2018). Sustainable production of concrete containing discarded beverage glass as fine aggregate. Construction and Building Materials, 177, 116–124. https://doi.org/10.1016/j.conbuildmat.2018.05.119
Cestari, S. P., Silva Freitas, D. de F., Rodrigues, D. C., & Mendes, L. C. (2018). Recycling processes and issues in natural fiber-reinforced polymer compo-sites. In Green Composites for Automotive Applications (pp. 285–299). https://doi.org/10.1016/B978-0-08-102177-4.00012-4
Clark, E., Bleszynski, M., Valdez, F., & Kumosa, M. (2020). Recycling carbon and glass fiber polymer matrix composite waste into cementitious materials. Resources, Conservation and Recycling, 125(2), 197–201. https://doi.org/10.1016/j.resconrec.2019.104659
Corinaldesi, V., Gnappi, G., Moriconi, G., & Montenero, A. (2005). Reuse of ground waste glass as aggregate for mortars. Waste Management, 25(2), 197–201. https://doi.org/10.1016/j.wasman.2004.12.009
Damci, E., Temur, R., Bekdaş, G., & Sayin, B. (2015). Damages and causes on the structures during the October 23, 2011 Van earthquake in Turkey. Case Studies in Construction Materials. https://doi.org/10.1016/j.cscm.2015.10.001
De Castro, S., & De Brito, J. (2013). Evaluation of the durability of concrete made with crushed glass aggregates. Journal of Cleaner Production, 17, 7–14. https://doi.org/10.1016/j.jclepro.2012.09.021
Dehghan, A., Peterson, K., & Shvarzman, A. (2017). Recycled glass fiber reinforced polymer additions to Portland cement concrete. Construction and Building Materials, 46(15), 238–250. https://doi.org/10.1016/j.conbuildmat.2017.04.011
Dobiszewska, M., & Beycioğlu, A. (2020). Physical properties and microstructure of concrete withwaste basalt powder addition. Materials. https://doi.org/10.3390/MA13163503
Erek, E., Sever, M. S., Serdengecti, K., Vanholder, R., Akoǧlu, E., Yavuz, M., … Kutlay, F. (2002). An overview of morbidity and mortality in patients with acute renal failure due to crush syndrome: The Marmara earthquake experience. Nephrology Dialysis Transplantation, 17(1).
Evram, A., Akçaoğlu, T., Ramyar, K., & Çubukçuoğlu, B. (2020). Effects of waste electronic plastic and marble dust on hardened properties of high strength concrete. Construction and Building Materials, 263, 1–10. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2020.120928
Farinha, C. B., de Brito, J., & Veiga, R. (2019). Assessment of glass fibre reinforced polymer waste reuse as filler in mortars. Journal of Cleaner Production, 210, 1579–1594. https://doi.org/10.1016/j.jclepro.2018.11.080
Guo, P., Meng, W., Nassif, H., Gou, H., & Bao, Y. (2020). New perspectives on recycling waste glass in manufacturing concrete for sustainable civil infrastructure. Construction and Building Materials, 257, 1–15. https://doi.org/10.1016/j.conbuildmat.2020.119579
Jain, K. L., Sancheti, G., & Gupta, L. K. (2020). Durability performance of waste granite and glass powder added concrete. Construction and Building Materials, 252, 119075. https://doi.org/10.1016/j.conbuildmat.2020.119075
Khodabakhshian, A., Ghalehnovi, M., de Brito, J., & Asadi Shamsabadi, E. (2018). Durability performance of structural concrete containing silica fume and marble industry waste powder. Journal of Cleaner Production, 170, 42–60. https://doi.org/10.1016/j.jclepro.2017.09.116
Mashaly, A. O., El-Kaliouby, B. A., Shalaby, B. N., El-Gohary, A. M., & Rashwan, M. A. (2016). Effects of marble sludge incorporation on the properties of cement composites and concrete paving blocks. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2015.07.023
Meira Castro, A. C., Carvalho, J. P., Ribeiro, M. C. S., Meixedo, J. P., Silva, F. J. G., Fiúza, A., & Dinis, M. L. (2014). An integrated recycling approach for GFRP pultrusion wastes: Recycling and reuse assessment into new composite materials using Fuzzy Boolean Nets. Journal of Cleaner Production, 66, 420–430. https://doi.org/10.1016/j.jclepro.2013.10.030
Meng, Y., Ling, T. C., & Mo, K. H. (2018). Recycling of wastes for value-added applications in concrete blocks: An overview. Resources, Conservation and Recycling, 138, 298–312. https://doi.org/10.1016/j.resconrec.2018.07.029
Oliveux, G., Dandy, L. O., & Leeke, G. A. (2015). Current status of recycling of fibre reinforced polymers: Review of technologies, reuse and resulting properties. Progress in Materials Science, 72, 61–99. https://doi.org/10.1016/j.pmatsci.2015.01.004
Osmani, M., & Pappu, A. (2010). Utilisation of glass reinforced plastic waste in concrete and cement composites. In 2nd International Conference on Sustainable Construction Materials and Technologies (pp. 28–30).
Özüyaǧli, A., Mehmetalioǧlu, C., Özsoy, M., & Akinci, A. (2016). Investigation of mechanical properties of GFRP pipe production waste filled pvc matrix composites. Journal of the Faculty of Engineering and Architecture of Gazi University, 31(2), 465–472.
Ribeiro, M. C. S., Fiúza, A., Castro, A. C. M., Silva, F. G., Dinis, M. L., Meixedo, J. P., & Alvim, M. R. (2013). Mix design process of polyester polymer mortars modified with recycled GFRP waste materials. Composite Structures, 105, 300–310. https://doi.org/10.1016/j.compstruct.2013.05.023
Sabǎu, E., Bâlc, N., Bere, P., & Nemeş, O. (2012). New materials from waste glass fibre. Studia Universitatis Babes-Bolyai Chemia.
Saikia, N., & De Brito, J. (2012). Use of plastic waste as aggregate in cement mortar and concrete preparation: A review. Construction and Building Mate-rials, 34, 385–401. https://doi.org/10.1016/j.conbuildmat.2012.02.066
Saribiyik, M., Piskin, A., & Saribiyik, A. (2013). The effects of waste glass powder usage on polymer concrete properties. Construction and Building Materials, 47, 840–844. https://doi.org/10.1016/j.conbuildmat.2013.05.023
SILVA, Yimmy Fernando; LANGE, David A.; DELVASTO, S. (2020). Effects of the incorporation of residue of masonry on the properties of cementi-tious mortars. Revista de La Construcción. Journal of Construction, 9(3), 407–421.
Soloaga, I. S., Oshiro, A., & Positieri, M. (2014). The use of recycled plastic in concrete. An alternative to reduce the ecological footprint. Revista de La Construccion. https://doi.org/10.4067/s0718-915x2014000300003
Tittarelli, F., & Moriconi, G. (2010). Use of GRP industrial by-products in cement based composites. Cement and Concrete Composites. https://doi.org/10.1016/j.cemconcomp.2009.11.005
Tittarelli, Francesca. (2013). Effect of low dosages of waste GRP dust on fresh and hardened properties of mortars: Part 2. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2013.06.086
Tittarelli, Francesca, & Shah, S. P. (2013). Effect of low dosages of waste GRP dust on fresh and hardened properties of mortars: Part 1. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2013.06.043
Topçu, I. B., Bilir, T., & Uygunoǧlu, T. (2009). Effect of waste marble dust content as filler on properties of self-compacting concrete. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2008.09.007
TS 706 EN 12620+A1. Aggregates for concrete (2009). Turkey.
TS 802. Design of concrete mixes (2016).
TS EN 12390-2. (2000). Testing fresh concrete Ð Part 2 : Slump test (Turkish). TS EN 12350-2.
TS EN 12390-3. Testing hardened concrete - Part 3: Compressive strength of test specimens, Pub. L. No. TS EN 12390-3 (2019). Turkey.
TS EN 12390-7. Testing hardened concrete - Part 7: Density of hardened concrete (2019). Turkey.
TS EN 480-5. Admixtures for concrete, mortar and grout - Test methods - Part 5: Determination of capillary absorption (2008). Turkey.
Türkmen, I., & Kantarci, A. (2007). Effects of expanded perlite aggregate and different curing conditions on the physical and mechanical properties of self-compacting concrete. Building and Environment. https://doi.org/10.1016/j.buildenv.2006.06.002
Vijayalakshmi, M., Sekar, A. S. S., & Ganesh Prabhu, G. (2013). Strength and durability properties of concrete made with granite industry waste. Con-struction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2013.04.018
Witik, R. A., Teuscher, R., Michaud, V., Ludwig, C., & Månson, J. A. E. (2013). Carbon fibre reinforced composite waste: An environmental assessment of recycling, energy recovery and landfilling. Composites Part A: Applied Science and Manufacturing, 49, 89–99. https://doi.org/10.1016/j.compositesa.2013.02.009
Xiao, R., Polaczyk, P., Zhang, M., Jiang, X., Zhang, Y., Huang, B., & Hu, W. (2020). Evaluation of Glass Powder-Based Geopolymer Stabilized Road Bases Containing Recycled Waste Glass Aggregate. Transportation Research Record, 2674, 22–32. https://doi.org/10.1177/0361198119898695
Yazdanbakhsh, A., Bank, L. C., & Tian, Y. (2018). Mechanical processing of GFRP waste into large-sized pieces for use in concrete. Recycling, 3(1), 1–11. https://doi.org/10.3390/recycling3010008
Yurt, Ü. (2020). High performance cementless composites from alkali activated GGBFS. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2020.120222
