Performance evaluation of porous asphalt mixtures modified with basalt fiber
DOI:
https://doi.org/10.7764/RDLC.21.1.93Keywords:
porous asphalt, basalt fiber, ferrochrome slag, fly ash, permeabilityAbstract
Porous pavement applications, which is environmentally friendly, especially for residential areas, allow rainwater to remain clean and to feed groundwater through infiltration. Porous asphalt pavements, in which are among the pavement types used in porous pavements systems, also reduce environmental noise pollution. On the other hand, there is a need to improve the performance of these asphalt pavement mixtures, which have a short service life due to their porous structure. It has been considered to improve the performance of the pavement mixtures by using basalt fiber without compromising the hydraulic permeability level. The waste slag material released during the ferrochrome production process was used as aggregate in the porous asphalt mixture design. Thus, it is aimed to benefit from the economic and environmental aspects with the recycling of ferrochrome slag in an area suitable for its properties. In the study, the design performances of porous asphalt mixtures were determined with tests such as volume analysis, permeability, Cantabro particle loss, indirect tensile strength, and moisture susceptibility. Basalt fiber was added at 0.2%, 0.4%, 0.6% and 0.8% of the mixture weight. It has been determined that the mixtures of basalt fibers at 0.2% significantly improve the mechanical performance.
Downloads
References
AASHTO T275-17, 2017. Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Paraffin-Coated Specimens. American Assoc. of State and High. Trans. Official., Washington, D.C.
AASHTO T 283-14, 2014. Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage. American Ass. of State High. and Trans. Officials, Washington, DC.
Afonso, M.L., Dinis-Almeida, M., Fael, C.S. (2017). Study of the porous asphalt performance with cellulosic fibres. Construction and Build-ing Materials, 135,104–111. https://doi.org/10.1016/j.conbuildmat.2016.12.222
Afonso M.L., Dinis-Almeida M., & Fael, C.S. (2019). Characterization of the skid resistance and mean texture depth in a permeable asphalt pavement. In: IOP Conference Series: Materials Science and Engineering, 471 (2), 022029. https://doi.org/10.1088/1757-899X/471/2/022029
Aktaş, B., Aytekin, Ş. & Aslan, Ş. (2018). Evaluation of typical wma additives on design parameters of SMA mixtures. Revista de la Cons-trucción, 18 (3), 409-417. https://doi.org/10.7764/RDLC.18.3.409
Arrieta, V. S., & Maquilon, J. C. (2014). Resistance to degradation or cohesion loss in Cantabro test on specimens of porous asphalt friction courses. Procedia Soc. Behav. Sci, 162, 290-299.
ASTM D2041/D2041M-19, 2019. Standard Test Method for Theoretical Maximum Specific Gravity and Density of Asphalt Mixtures. ASTM International, West Conshohocken, PA.
ASTM D6931-17, 2017. Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures. ASTM International, West Con-shohocken, PA.
Cetin A., Kaya Z., Cetin B., & Aydilek A., (2014)."Influence of laboratory compaction method on mechanical and hydraulic characteristics of unbound granular base materials", Road Materials and Pavement Design, 15(1), 220-235. https://doi.org/10.1080/14680629.2013.869505
Claytor, R. (2000). New Developments in Street Sweeper Technology: The Practice of Watershed Protection. Watershed Protection Tech-niques, Technical Note, 3(1), 601-604.
Cooley, L. A., Brumfield, J., Wogawer, R. M., Partl, M., Poulikakos, L., & Hicks, G. (2009). Construction and Maintenance Practices for Permeable Friction Courses. NCHRP Report 640, Board of the National Academies, Washington, D.C. 1.
Dostkimya. Basalt Fiber Technical Specification. Dostkimya Manufactory. Retrieved May 18, 2021, from https://www.dostkimya.com/en/products/fiber-admixtures//staple-chopped-basalt-fiber
Eisenberg, Bethany, Kelly Collins Lindow, and David R. Smith. 2015. Permeable Pavements. Reston: ASCE.http://ebookcentral.proquest.com.proxy.cc.uic.edu/lib/uic/detail.action? docID=3115713.
FDOT (2015). Measurement of Water Permeability of Compacted Asphalt Paving Mixtures. Florida Department of Transportation. Spec. FM 5-565, Gainesville, FL.
Gupta, A., Rodriguez-Hernandez, J., & Castro-Fresno, D. (2019) Incorporation of Additives and Fibers in Porous Asphalt Mixtures: A Re-view. Material, 12, 3156. https:// doi.org/10.3390/ma12193156
Gupta, A., Lastra-Gonzalez,P., Castro-Fresno, D., & Rodriguez-Hernandez, J. (2021). Laboratory Characterization of Porous Asphalt Mixtures with Aramid Fibers. Materials, 14, 1935. https://doi.org/10.3390/ma14081935
Hwee, L.B. (2008). Performance-related evaluation of porous asphalt mix design. Hanson Building Materials, 17.
Istanbulteknik. Hipercell selülozik fiber Technical Specification. Retrieved May 18, 2021, from https://www.istanbulteknik.com/en/asphalt-products/hipercell-cellulosic-fiber
Jacobson, T., Sandberg, U., & Viman, L., (2017). How do we improve the durability of porous asphalt, in: 6th Eurasphalt & Eurobitume Congress, Prague, Czech Republic. https://doi.org/10.14311/ee.2016.147
Ma, X., Li, Q., Cui Y., & Ni A. (2018) Performance of porous asphalt mixture with various additives, International Journal of Pavement Engi-neering, 19:4, 355-361, https://doi.org/10.1080/10298436.2016.1175560
Mallick R.B., Kandhal P. S., Cooley L. A., & Watson D. E. (2000). Design Construction and Performance of New Generation Open-Graded Friction Courses. NCAT Report 00–01, National Center for Asphalt Technology, Auburn, AL.
Moore L.M., Hicks R.G., & Rogge D.F. (2001). Design, construction, and maintenance guidelines for porous asphalt pavements. Trans. Res. Rec.: J. of the Trans. Res. Board, 1778, 01–0422. https://doi.org/10.3141/1778-11
Mullaney J., & Lucke T. (2014). Practical review of pervious pavement designs. Clean Soil Air Water, 42 (2), 111–124. https://doi.org/10.1002/clen.201300118
Ndon U.J., & Al-Manaseer A. (2017). Permeable Pavement as A Sustainable Management Option for Highway Stormwater and Safe Use of Roadways. Mineta Trans. Inst. Final Report, WP Report 12–13, San José, CA.
Pancic I., Ilic V., Oreskovic M., & Gavran D. (2017). The use of porous asphalt for the improvement of the grading plan geometry and drain-age of pavement surfaces on urban roads. In: Inter. Congress on Trans. Infrastr. and Sys. – TIS, Rome, Italy.
Pasetto M. (2000). Porous asphalt concretes with added microfibres. 2nd Eurasphalt & Eurobitume Congress, Barcelona.
Raaberg J., Schmidt B., & Bendtsen H. (2001). Technical Performance and Long-Term Noise Reduction of Porous Asphalt Pavements. Danish Road Inst. Report 112, Roskilde, Denmark.
Radzi, N. A. M., Masri1, K. A., Ramadhansyah, P. J., Jasni, N. E., Arshad, A. K., Ahmad, J., Mashros, N., & Yaacob, H. (2020). Stability and Resilient Modulus of Porous Asphalt Incorporating Steel Fiber. IOP Conf. Series: Materials Science and Engineering, 712, 012027. doi:10.1088/1757-899X/712/1/01202
Senior-Arrieta V., & Córdoba-Maquilón J.E. (2017). Mechanical characterization of porous asphalt mixes modified with fatty acid amides -FAA. Ingeniería e Investigación, Vol. 37 (1), 43-48. http://dx.doi.org/10.15446/ing.investig.v37n1.57158
Serfass, J.P., & Samanos, J. (1996). Fiber-Modified Asphalt Concrete Characteristics, Applications and Behavior. Journal of the Association of Asphalt Paving Technologists, Vol. 65, p 193-230.
Smit, A. (2008). Synthesis of NCAT Low-Noise HMA Studies. NCAT Report 08-01. Auburn University: NCAT 2-3.
THTS (2013). Porous Asphalt, Highway Technical Specifications. General Directorate of Highway, Sec. 417, Ankara.
TS EN 12697-17, 2017. Bituminous Mixtures - Test Methods - Part 17: Particle Loss of Porous Asphalt Specimens. Turkish Standards Insti-tution, Ankara.
Vaitkus A., Andriejauskas T., Vorobjovas V., Jagniatinskis A., Fiks B., & Zofka E. (2017). Asphalt wearing course optimization for road traffic noise reduction. Const. and Build. Mater. 152, 345–356. https://doi.org/10.1016/j.conbuildmat.2017.06.130.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Altan Çetín, Gokhan Oral
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
