Performance of composite shear walls strengthened with FRP and subjected to blast load
DOI:
https://doi.org/10.7764/RDLC.22.2.431Keywords:
Blast load, composite shear wall, finite element analysis, FRP sheet.Abstract
The present paper aims to explore the performance of composite shear walls reinforced with Fiber Reinforced Polymer (FRP) sheets, subjected to blast loads. The finite-element method (FEM) implemented in the ABAQUS software is used to evaluate several numerical models to meet this objective. The parametric behavior of the system under the effect of blast load intensity was investigated, along with the FRP sheet material, concrete compressive strength, and also the geometric characteristics of wall components such as its thickness, spacing of FRP sheets, and thickness of the cross-sectional shape of the steel plates under the effect of blast load. It was found that the reinforcement of the composite shear wall by incorporating FRP sheets not only increases the stress absorption in the wall but also increases the load transfer capacity and leads to high energy dissipation using the polymer fibers. It has been found that carbon polymer sheets (CFRP) and glass polymer sheets (GFRP) have, respectively, the best and the weakest performance in shear wall stress absorption compared to AFRP sheets, and this is due to the tensile strength and low density of CFRP sheets. As the thickness of FRP sheets increases, the stress, strain and displacement created in the composite shear wall decrease, owing to the increase of the final strength, which is, in turn, the result of the increase in fiber thickness.
Downloads
References
Ajimituhuo, J. L., Abejide, O. S., & Mangut, S. (2018). Reliability analysis of CFRP shear walls subject to blast loading. Nigerian Journal of Technology, 37(3), 626–632.
Askarizadeh, N., & Mohammadizadeh, M. R. (2017). Numerical analysis of carbon fiber reinforced plastic (CFRP) shear walls and steel strips under cyclic loads using finite element method. Engineering, Technology & Applied Science Research, 7(6), 2147–2155.
Chen, L., Mahmoud, H., Tong, S.-M., & Zhou, Y. (2015). Seismic behavior of double steel plate–HSC composite walls. Engineering Structures, 102, 1–12.
Committee, A. C. I. (2008). Building code requirements for structural concrete (ACI 318-08) and commentary.
Dan, D. (2012). Experimental tests on seismically damaged composite steel concrete walls retrofitted with CFRP composites. Engineering Structures, 45, 338–348.
Epackachi, S., Nguyen, N. H., Kurt, E. G., Whittaker, A. S., & Varma, A. H. (2014). Numerical and experimental investigation of the in-plane behavior of rectangular steel-plate composite walls. Structures Congress 2014, 2478–2487.
Goel, M. D., & Matsagar, V. A. (2014). Blast-resistant design of structures. Practice Periodical on Structural Design and Construction, 19(2), 04014007.
Jayasooriya, J., Thambiratnam, D., Perera, N., & Kosse, V. (2009). Response and damage evaluation of reinforced concrete frames subjected to blast loading. Proceedings of the 34th Conference on Our World in Concrete & Structures-Conference Documentation Volume XXVIII, 123–130.
Hosseini, M., Jian, B., Li, H., Yang, D., Wang, Z. et al. (2022). A Review of Fibre Reinforced Polymer (FRP) Reinforced Concrete Composite Column Members Modelling and Analysis Techniques. Journal of Renewable Materials, 10(12), 3243–3262.
Wilt, J., GangaRao, H., Liang, R. F., & Mostoller, J. (2023). Structural responses of FRP sheet piles under cantilever loading. Sustainable Structures, 3(1), 000021.
Mohamed, T., Elshazli, N. S., & Ahmed, I. (2022). Structural response of high strength concrete beams using fiber reinforced polymers under reversed cyclic loading. Sustainable Structures, 2(2), 000018.
Liang, R., & Hota, G. (2021). Development and evaluation of load-bearing fiber reinforced polymer composite panel systems with tongue and groove joints. Sustainable Structures, 1(2), 000008
Mutalib, A.A., & Hao, H. (2011). Numerical analysis of FRP-composite-strengthened RC panels with anchorages against blast loads. Journal of Perfor-mance of Constructed Facilities, 25(5), 360-372.
Ji, X., Jiang, F., & Qian, J. (2013). Seismic behavior of steel tube–double steel plate–concrete composite walls: Experimental tests. Journal of Construc-tional Steel Research, 86, 17–30.
Khizab, B., Sadeghi, A., Hashemi, S. V., Mehdizadeh, K., & Nasseri, H. (2021). Investigation the performance of Dual Systems Moment-Resisting Frame with Steel Plate Shear Wall Subjected to Blast Loading. Journal of Structural and Construction Engineering, 8(8), 102–127.
Kulak, G. L., Grondin, G. Y., Adams, P. F., & Krentz, H. A. (1998). Limit states design in structural steel. Canadian Institute of Steel Construction.
Liang, Q. Q. (2009). Strength and ductility of high strength concrete-filled steel tubular beam–columns. Journal of Constructional Steel Research, 65(3), 687–698.
Mander, J. B., Priestley, M. J., & Park, R. (1988). Theoretical stress-strain model for confined concrete. Journal of Structural Engineering, 114(8), 1804–1826.
Moghimi, H., & Driver, R. G. (2015). Performance assessment of steel plate shear walls under accidental blast loads. Journal of Constructional Steel Re-search, 106, 44–56.
Nie, J.-G., Hu, H.-S., Fan, J.-S., Tao, M.-X., Li, S.-Y., & Liu, F.-J. (2013). Experimental study on seismic behavior of high-strength concrete filled double-steel-plate composite walls. Journal of Constructional Steel Research, 88, 206–219.
Hosseini, M., Bingyu, J., Jian, Z., Li, H., Lorenzo, R., et al. (2023). Numerical Study on the behaviour of Hybrid FRPs Reinforced RC Slabs Subjected to Blast Loads. Journal of Renewable Materials, 11(9), 1-15.
Nie, J.-G., Ma, X.-W., Tao, M.-X., Fan, J.-S., & Bu, F.-M. (2014). Effective stiffness of composite shear wall with double plates and filled concrete. Journal of Constructional Steel Research, 99, 140–148.
Nguyen, N. H. (2016). Seismic response of steel-plate concrete composite shear wall piers. State University of New York at Buffalo.
Shabanlou, M., Moghaddam, H., & Saedi Daryan, A. (2021). The Effect of Geometry on Structural Behavior of Buildings with Steel Plate Shear Wall System Subjected to Blast Loading. International Journal of Steel Structures, 21(2), 650–665.
Shirinzadeh, M., & Haghollahi, A. (2016). Performance of shear wall with external reinforcement by CFRP and steel sheets against blast load. Journal of Vibroengineering, 18(5), 2735–2743.
Thorburn, L. J., Montgomery, C. J., & Kulak, G. L. (1983). Analysis of steel plate shear walls.
Timothy, P., McCormick , P.E. (2010) "Shear Walls guideline, Seismic Retrofit Training",New-Jersey,
Wagner, H. (1935). Tension fields in originally curved, thin sheets during shearing stresses (Issue 774). National Advisory Commitee for Aeronautics.
Warn, G. P., & Bruneau, M. (2009). Blast resistance of steel plate shear walls designed for seismic loading. Journal of Structural Engineering, 135(10), 1222–1230.
Zhao, Q., & Astaneh-Asl, A. (2004). Cyclic behavior of traditional and innovative composite shear walls. Journal of Structural Engineering, 130(2), 271–284.
Zhao, W., Guo, Q., Huang, Z., Tan, L., Chen, J., & Ye, Y. (2016). Hysteretic model for steel–concrete composite shear walls subjected to in-plane cyclic loading. Engineering Structures, 106, 461–470.
Zhang, X., Qin, Y., & Chen, Z. (2016). Experimental seismic behavior of innovative composite shear walls. Journal of Constructional Steel Research, 116, 218–232.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Mahdi Hosseini, Haitao Li , Ahmad Hosseini, Pritam Ghosh
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
