Requirements for BIM implementation in AEC companies: a Brazilian case study

Authors

  • Ayanna Karina de Assis Santos Wanderley Civil Engineering Program, University of Pernambuco, Recife (Brazil)
  • Alberto Casado Lordsleem Júnior Civil Engineering Program, University of Pernambuco, Recife (Brazil)
  • Joaquin Humberto Aquino Rocha Civil Engineering Program, Federal University of Rio de Janeiro, Rio de Janeiro (Brazil)

DOI:

https://doi.org/10.7764/RDLC.22.2.455

Keywords:

Building information modeling, implementation requirements, AEC companies, Brazil, case studies.

Abstract

Building Information Modeling (BIM) is widespread in many countries; however, its implementation still encounters some barriers in Brazil. In addition, during the BIM implementation process, some companies give up because they do not achieve the expected result. In the Metropolitan Region of Recife, adherence to the BIM methodology is less than 5% of the research universe, which is 445 among companies and professionals. This study evaluates the fulfillment of the necessary requirements for BIM implementation at Brazilian architecture, engineering, and construction (AEC) companies. The methodology was carried out using case studies and its strategy was based on the following steps: identification of the state-of-the-art and of requirements for BIM implementation, which allowed the determination of the criteria for evaluating the companies studied; the criteria determined were use to elaborate an online form for identification of AEC companies in Recife (Brazil) and a questionnaire for conducting interviews with the selected companies; subsequently, case studies were developed, and data analysis. The case studies were carried out at five AEC companies which had a median fulfilment of requirements of 65%. Many of the companies presented BIM 1.0 characteristics. It has been verified that the BIM implementation is more effective at companies where a greater number of BIM requirements are applied. The companies with the fewest requirements applied, or those that did not meet the requirements in practice, did not present significant advances in BIM implementation. The main research contributions were the compilation of the requirements for BIM implementation. Therefore, this study produces knowledge that can assist companies in the AEC industry experiencing similar difficulties in BIM implementation as those described in this paper.

Downloads

Download data is not yet available.

References

Adeniyi, O., Thurairajah, N., & Leo-Olagbaye, F. (2022). Rethinking digital construction: A study of BIM uptake capability in BIM infant construction industries. Construction Innovation, (ahead-of-print).

Ahankoob, A., Manley, K., Hon, C., & Drogemuller, R. (2018). The impact of building information modelling (BIM) maturity and experience on contrac-tor absorptive capacity. Architectural Engineering and Design Management, 14(5), 363–380.

American Institute of Architects (2020). Firm Survey Report 2020. AIA, Washington. Available at: https://content.aia.org/sites/default/files/2020-11/2020_Firm_Survey_Report.pdf

Andersen, M. T., & Findsen, A. L. (2018). Exploring the benefits of structured information with the use of virtual design and construction principles in a BIM life-cycle approach. Architectural Engineering and Design Management, 1–18.

Andrade, M. L. V. (2012). Performative Design in the Recent Architectural Practice Conceptual Framework. College of Civil Engineering, Architecture and Urbanism of the State University of Campinas, Campinas.

Autodesk (2014). BIM pilot, getting started for construction professionals. Available at: http://staticdc.autodesk.net/content/dam/autodesk/www/campaigns/test-drive-bim-q3/bds/getting-startedguide-v3.pdf

Brazil (2018). Decree No 9377, May 17, 2018. National Strategy for Dissemination of Building Information Modeling. Official Journal of the Union, Brasília.

Carmo, C. S. T.; Almeida, G. Z., & Souza, L. L. (2019). Gestão de projetos da construção civil com a metodologia BIM aplicada: Estudo de caso [Project management in civil construction applying the BIM methodology: case study]. Brazilian Journal of Production Engineering, 5(2), 107-119 (in Portu-guese).

CBIC - Brazilian Chamber of Construction Industry. (2016, September 15). Collection of BIM Implementation for Builders and Developers. Available at: http://cbic.org.br/bim/.

Ding, Z., Zuo, J., Wu, J., & Wang, J. Y. (2015). Key factors for the BIM adoption by architects: A China study. Engineering, Construction and Architectural Management, 22(6), 732–748.

Eastman, C., Teicholz, P., Sacks, R., & Liston, K. (2010). BIM Handbook: a guide to Building Information Modeling for owners, managers, designers, engineers and contractors. New Jersey.

Fitz, D. V., & Saleeb, N. (2019). Examining the quality and management of non-geometric building information modelling data at project handover. Architectural Engineering and Design Management, 1–14.

Gil, A. C. (2010). Como elaborar projetos de pesquisa [How to design research projects]. São Paulo: Atlas (in Portuguese).

He, Q., Qian, L., Duan, Y., & Li, Y. (2012). Current situation and barriers of BIM implementation. Journal of Management in Engineering, 26(1), 12–16.

Hosseini, M. R., Maghrebi, M., Akbarnezhad, A., Martek, I., & Arashpour, M. (2018). Analysis of Citation Networks in Building Information Modeling Research. Journal of Construction Engineering and Management, 144(8).

Huber, R. (2012). New Zealand national BIM survey 2012. Masterspec-Construction Information Ltd.

Jin, R., Hancock, C. M., Tang, L., & Wanatowski, D. (2017). BIM Investment, Returns, and Risks in China’s AEC Industries. Journal of Construction Engineering and Management, 143(12).

Juszczyk, M., Výskala, M., & Zima, K. (2015). Prospects for the use of BIM in Poland and the Czech Republic – Preliminary research results. Procedia Engineering, 123, 250 – 259.

Kassem, M., Amorim, S. (2015). BIM Building Information Modeling no Brasil e na União Europeia. Brasília. (in Portuguese).

Kiviniemi, A. (2015). Experiences from the BIM-Adoption in Finland and UK – Clients as the drivers of innovation. Liverpool: School of Architecture at University of Liverpool.

Kiviniemi, A., Tarandi, V., Karlshøj, J., Bell, H., & Karud, O. J. (2008). Review of the development and implementation of IFC compatible BIM: final report of the Erabuild Project. Erabuild.

Le, N. O., Er, M., & Sankaran, S. (2018). The implementation of Building Information Modelling (BIM) in construction industry: Case studies in Vietnam. International Journal of Engineering and Technology, 10(4).

Liu, Y., Nederveen, S. V., & Hertogh, M. (2017). Understanding effects of BIM on collaborative design and construction: An empirical study in China. International Journal of Project Management, 35(4), 686–698.

Louzas, R. (2013). Research shows that over 90% of architects and engineers intend to use BIM in up to five years. Available at: http://piniweb.pini.com.br/construcao/carreira-exercicioprofissionalentidades/artigo291885-1.aspx

Loyola, M., & López, F. (2018). An evaluation of the macro-scale adoption of Building Information Modeling in Chile: 2013-2016. Revista de la Con-struccion, 17(1), 158-171.

McGraw-Hill Construction. (2010). The business value of BIM in Europe: Getting building information modelling to the bottom line the United Kingdom, France and Germany (Smart Market Report). New York: McGraw-Hill.

McGraw-Hill Construction. (2012). The business value of BIM in north America: multi-year trend analysis and user ratings (2007-12) (Smart Market Report). Bedford: McGraw Hill.

McGraw-Hill Construction. (2014). The Business Value of BIM for Construction in Major Global Markets: How Contractors Around the World Are Driv-ing Innovation With Building Information Modeling (Smart Market Report). Bedford: McGraw Hill.

Menezes, G. L. B. B. (2011). Breve histórico de implementação da plataforma BIM [A briefhistory of the implementation of the BIM platform]. Cadernos de Arquitetura e Urbanismo, 18(22), 152-171. (in Portuguese).

NATSPEC - National Building Specification. (2014). NATSPEC BIM Paper NBP 002: Getting Started with BIM. Available at: http://bim.natspec.org/images/NATSPECDocuments/NATSPECBIMPaperGettingstartedwith_BIM140529.pdf.

Nguyen, K. T. L. (2017). Adoption building information modelling (BIM) in general contractor. Asian Institute of Technology, Thailand.

Okakpu, A., GhaffarianHoseini, A., Tookey, J., Haar, J., & Ghaffarianhoseini, A. (2019). Exploring the environmental influence on BIM adoption for refurbishment project using structural equation modelling. Architectural Engineering and Design Management, 1–17.

Raouf, A. M. I., & Al-Ghamdi, S. G. (2018). Building information modelling and green buildings: challenges and opportunities. Architectural Engineering and Design Management, 1–28.

RICS School of Build Environment (2014). State of BIM Adoption and Outlook in India. Noida: Amity University.

Rodgers, C, Hosseini, M. R., Chileshe, N., & Rameezdeen, R. (2016). Building information modelling (BIM) within the Australian construction related small and medium sized enterprises: Awareness, Practices and Drivers. Construction Law Journal, 32(3), 257–268.

Rodrigues, R. M. (2007). Pesquisa Acadêmica: Como facilitar o processo de preparação de suas etapas [Academic Research: How to facilitate the process of preparing your steps], São Paulo: Atlas. (in Portuguese).

SMHURC - State Ministry of Housing and Urban-Rural Construction. (2011). The 2011–2015 development guideline for the construction industry digital-ization. Beijing.

SMHURC - State Ministry of Housing and Urban-Rural Construction. (2013). Request for proposal on BIM application in the construction industry. Beijing.

Smith, P. (2014). BIM implementation - Global strategies. Procedia Engineering, 85, 482–492.

Succar, B. (2009). Building information modeling framework: a research and delivery foundation for industry stakeholders. Automation in Construction, 18(3), 357-375.

Succar, B., & Kassem, M. (2015). Macro-BIM adoption: Conceptual structures, Automation in Construction, 57, 64-79.

Tobin, J. (2008). Proto-building: to BIM is to build. AECbytes. Available at: http://www.aecbytes.com/buildingthefuture/2008/ProtoBuilding.html.

USACE - United States Army Corps of Engineers. (2006). Building Information Modeling (BIM): A Road Map for Implementation to Support MILCON Transformation and Civil Works Projects within the U.S. Washington.

USACE - United States Army Corps of Engineers. (2011). Building information modeling (BIM) roadmap: supplement 2 - BIM implementation plan for military construction projects. Bentley Platform. Washington.

Wanderley, A. K. A. S. (2017). Premisses for Building Information Modeling implantation in design and construction companies: case studies. Polytechnic School of Pernambuco University, Recife.

Wong, A. K., Wong, F. K., & Nadeem, A. (2011). Government roles in implementing building information modelling systems: Comparison between Hong Kong and the United States. Construction innovation, 11(1), 61-76.

Downloads

Published

2023-09-01

How to Cite

Wanderley, A. K. de A. S., Lordsleem Júnior, A. C., & Aquino Rocha, J. H. (2023). Requirements for BIM implementation in AEC companies: a Brazilian case study. Revista De La Construcción. Journal of Construction, 22(2), 455–481. https://doi.org/10.7764/RDLC.22.2.455