Heavy aggregate and different admixtures effect on pavings: pyrite, corundum and water-retaining polymer
DOI:
https://doi.org/10.7764/RDLC.23.1.31Keywords:
pyrite, corundum, water retaining polymer, concrete paving, XRD.Abstract
Concrete pavings are widely used in the construction industry as flooring for decorative and structural purposes in the gardens, parks, and roads of America, and Europe. In the present study, the effects of pyrite, corundum, and water-retaining polymer additives on the surface wear resistance of concrete pavings were investigated. Concrete pavings were poured in 2 stages and all of the bottom layers of samples were the same, but upper layers of pavings were produced by adding pyrite in the ratio of 0.10, 0.20, 0.30, 0.40 according to the mass of the aggregate, 5 kg /m2 corundum-based surface hardener to the paving surface area, and a high amount of water-absorbing polymer at a ratio of 0.05 and 0.10 to the water content of the mixture. Vertical abrasion, splitting tensile strength, water absorption, freeze-thaw resistance, pendulum footed friction, and surface hardness measurements with Schmidt test hammer experiments were made to TS 2824 EN 1338 standard. Also, X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM) analyses were carried out to characterize the produced materials. Results of the study indicate that the use of pyrite, corundum, and water-retaining polymers provided improvements in the surface wear resistance of concrete pavings.Concrete pavings are widely used in the construction industry as flooring for decorative and structural purposes in the gardens, parks, and roads of America, and Europe. In the present study, the effects of pyrite, corundum, and water-retaining polymer additives on the surface wear resistance of concrete pavings were investigated. Concrete pavings were poured in 2 stages and all of the bottom layers of samples were the same, but upper layers of pavings were produced by adding pyrite in the ratio of 0.10, 0.20, 0.30, 0.40 according to the mass of the aggregate, 5 kg /m2 corundum-based surface hardener to the paving surface area, and a high amount of water-absorbing polymer at a ratio of 0.05 and 0.10 to the water content of the mixture. Vertical abrasion, splitting tensile strength, water absorption, freeze-thaw resistance, pendulum footed friction, and surface hardness measurements with Schmidt test hammer experiments were made to TS 2824 EN 1338 standard. Also, X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM) analyses were carried out to characterize the produced materials. Results of the study indicate that the use of pyrite, corundum, and water-retaining polymers provided improvements in the surface wear resistance of concrete pavings.
Downloads
References
Karakurt, C., Turgut, K. A. Y. A., & Yazıcıoğlu, S. (2020). Effect of calcined bentonite on the abrasion behavior of concrete . Nigde Omer Halisdemir Unıversity Journal of Engineering Sciences, 9(2), 904-912. https://doi.org/10.28948/ngmuh.684467
Jamshidi, A., Kurumisawa, K., White, G., Nishizawa, T., Igarashi, T., Nawa, T., & Mao, J. (2019). State-of-the-art of interlocking concrete block pavement technology in Japan as a post-modern pavement. Construction and Building Materials, 200, 713-755. https://doi.org/10.1016/j.conbuildmat.2018.11.286
Aslantaş, O. (2004). A study on abrasion resistance of concrete paving blocks. Middle East Technical University, Master thesis.
Lin, W., Ryu, S., Hao, H., & Cho, Y. H. (2016). Development of a horizontal shifting mechanistic-empirical prediction model for concrete block pavement. Construction and Building Materials, 118, 245-255. https://doi.org/10.1016/j.conbuildmat.2016.04.124
Pheeraphan, T., & Leung, C. K. (1997). Freeze-thaw durability of microwave cured air-entrained concrete. Cement and concrete research, 27(3), 427-435. https://doi.org/10.1016/S0008-8846(97)00014-8
Gencel, O., Ozel, C., Koksal, F., Erdogmus, E., Martínez-Barrera, G., & Brostow, W. (2012). Properties of concrete paving blocks made with waste marble. Journal of cleaner production, 21(1), 62-70. https://doi.org/10.1016/j.jclepro.2011.08.023
Popek, M., Sadowski, Ł., & Szymanowski, J. (2016). Abrasion resistance of concrete containing selected mineral powders. Procedia Engineering, 153, 617-622. https://doi.org/10.1016/j.proeng.2016.08.209
Karpuz, O., & Akpınar, M. V. (2009). The effect of fine aggregate type on wear resistance of pavement concrete. Yapı Teknolojileri Elektronik Dergisi, 5(2), 1-8.
Çobanoğlu, İ., & Çelik, S. B. (2017). Assessments on the usability of Wide Wheel (Capon) test as reference abrasion test method for building stones. Construction and Building Materials, 151, 319-330. https://doi.org/10.1016/j.conbuildmat.2017.06.045
Şahin, R. (2003). Optimization of frost resistance of normal portland cement concrete by Taguchi method and damage analysis (Doctoral dissertation, Phd Thesis, Atatürk University, Erzurum, TR., 2003 (in Turkish with English Abstract)).
Cai, H., & Liu, X. (1998). Freeze-thaw durability of concrete: ice formation process in pores. Cement and concrete research, 28(9), 1281-1287. https://doi.org/10.1016/S0008-8846(98)00103-3
Meng Guo, Pengcheng Wei, Xiuli Du, Development and performance verification of a water-retaining semi-flexible pavement material based on alkali activated slag system incorporating superabsorbent polymers, Construction and Building Materials, 2024, 135715, https://doi.org/10.1016/j.conbuildmat.2024.135715
Murugan, R. B., Natarajan, C., & Chen, S. E. (2016). Material development for a sustainable precast concrete block pavement. Journal of Traffic and Transportation Engineering (English Edition), 3(5), 483-491. https://doi.org/10.1016/j.jtte.2016.09.001
Salguero, F., Grande, J. A., Valente, T., Garrido, R., De la Torre, M. L., Fortes, J. C., & Sánchez, A. (2014). Recycling of manganese gangue materials from waste-dumps in the Iberian Pyrite Belt–Application as filler for concrete production. Construction and Building Materials, 54, 363-368. https://doi.org/10.1016/j.conbuildmat.2013.12.082
Çoban, H. S. (2011). Optimization of binder matrix system at self flowing castable refractories and determination of fracture toughness, Master’s thesis, Afyon Kocatepe University, Afyon, TR, 2011 (in Turkish with English Abstract)).
Bal, H. (1998). Bazı polimerlerin harç ve betonda kullanılabilirliğinin araştırılması/Investigation of the usability of some polymers in mortar and concrete.
Tonyali, T. (2001). Polymer modified concrete micro structure and properties. Master’s thesis. Istanbul University, İstanbul, TR, 2001 (in Turkish with English Abstract)).
Chandrappa, A. K., & Biligiri, K. P. (2016). Pervious concrete as a sustainable pavement material–Research findings and future prospects: A state-of-the-art review. Construction and building materials, 111, 262-274. https://doi.org/10.1016/j.conbuildmat.2016.02.054
Silva, F. A. N., Silva, M. T. A., Delgado, J. M. P. Q., Azevedo, A. C., & Pereira, G. F. C. (2022). Construction and demolition waste as raw material in pavements layers. Revista de la construcción, 21(1), 184-192. https://doi.org/10.7764/RDLC.21.1.184
Kaya, O. (2022). Comprehensive evaluation of transverse joint spacing in jointed plain concrete pavement. Revista de la construcción, 21(3), 618-630. . https://doi.org/10.7764/RDLC.21.3.618
Shakhan, M. R., Topal, A., & Sengoz, B. (2022). Improving flexible pavement performance through suitable aggregate gradation. Revista de la construcción, 21(2), 295-308. . https://doi.org/10.7764/RDLC.21.2.295
TS 2824 EN 1338, 2005. Concrete Paving Blocks for Flooring - Required Conditions and Test Methods . TSE, Ankara, 58 p.
Valente, T. M. F., Grande, J. A., Salguero, F., & Sánchez, A. (2014). Mn mining wastes as an industrial income for concrete production: inventory of waste dumps and resources estimation in the Iberian Pyrite Belt, SW Spain.
TS 802, (2016), Concrete mix design calculation principles, Turkish Standards Institute, Ankara
Yavaşi, H. (2018). Determination of Mechanical and Radiation Absorption Properties of Ground Pyrite, Chromium and Magnetite Added Mortars. Master’s thesis. Recep Tayyip Erdogan University, Rize, TR, 2018 (in Turkish with English Abstract)).
Altomare, A., Cuocci, C., Giacovazzo, C., Moliterni, A., & Rizzi, R. (2008). QUALX: a computer program for qualitative analysis using powder diffraction data. Journal of Applied Crystallography, 41(4), 815-817. https://doi.org/10.1107/S0021889808016956
Altomare, A., Corriero, N., Cuocci, C., Falcicchio, A., Moliterni, A., & Rizzi, R. (2015). QUALX2. 0: a qualitative phase analysis software using the freely available database POW_COD. Journal of Applied Crystallography, 48(2), 598-603. https://doi.org/10.1107/S1600576715002319
Bulatović, V., Melešev, M., Radeka, M., Radonjanin, V., & Lukić, I. (2017). Evaluation of sulfate resistance of concrete with recycled and natural aggregates. Construction and Building Materials, 152, 614-631. https://doi.org/10.1016/j.conbuildmat.2017.06.161
Liu, C., Zhang, W., Liu, H., Zhu, C., Wu, Y., He, C., & Wang, Z. (2022). Recycled aggregate concrete with the incorporation of rice husk ash: Mechanical properties and microstructure. Construction and Building Materials, 351, 128934. https://doi.org/10.1016/j.conbuildmat.2022.128934
Uygunoğlu, T., Topcu, I. B., Gencel, O., & Brostow, W. (2012). The effect of fly ash content and types of aggregates on the properties of pre-fabricated concrete interlocking blocks (PCIBs). Construction and Building Materials, 30, 180-187. https://doi.org/10.1016/j.conbuildmat.2011.12.020
Özalp, F., Yılmaz, H. D., Kara, M., Kaya, Ö., & Şahin, A. (2016). Effects of recycled aggregates from construction and demolition wastes on mechanical and permeability properties of paving stone, kerb and concrete pipes. Construction and Building Materials, 110, 17-23. https://doi.org/10.1016/j.conbuildmat.2016.01.030
Sadek, D. M., El-Attar, M. M., & Ali, A. M. (2017). Physico-mechanical and durability characteristics of concrete paving blocks incorporating cement kiln dust. Construction and Building Materials, 157, 300-312. https://doi.org/10.1016/j.conbuildmat.2017.09.107
Sun, W., Zhang, Y. M., Yan, H. D., & Mu, R. (1999). Damage and damage resistance of high strength concrete under the action of load and freeze-thaw cycles. Cement and Concrete Research, 29(9), 1519-1523. https://doi.org/10.1016/S0008-8846(99)00097-6
Yoshitake, I., Ueno, S., Ushio, Y., Arano, H., & Fukumoto, S. (2016). Abrasion and skid resistance of recyclable fly ash concrete pavement made with limestone aggregate. Construction and Building Materials, 112, 440-446. https://doi.org/10.1016/j.conbuildmat.2016.02.185
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Ilker Ustabas, Sakir Erdogdu, Cihan Akyuz, Zafer Kurt, Talip Cakmak
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
