This is an outdated version published on 2023-12-31. Read the most recent version.

Optimization of fiber-reinforced deep cement-fly ash mixing column materials

Authors

Arda Burak EKMEN Department of Civil Engineering, Harran University, Şanlıurfa (Türkiye)
Halil Murat ALGIN Department of Civil Engineering, Harran University, Şanlıurfa (Türkiye)

DOI:

https://doi.org/10.7764/RDLC.22.3.707

Keywords:

Deep cement mixing (DCM), carbon fiber, fly ash, segregation.

Abstract

The flexural and compressive strength requirements of deep cement mixing (DCM) columns subjected to lateral loading have brought forth the demand to specify how the incorporation of fiber and fly ash improves these properties and the mixture quality, including the construction design characteristics of segregation and swelling. The paper addresses this issue considering the experimental results from the extensive parametric study in which various lengths and content of carbon fiber (4-, 6-, and 12-mm lengths and 0.1, 0.4, 0.8% by volume of the mixture) are incorporated into the cement-based mixtures with and without the optimized fly ash content. Along the strength parameters, the effects of mixture quality responses on the performance of DCM columns are also investigated. The segregation results of the fresh mixtures, unconfined compression strength (UCS), flexural strength, and swelling values from the 28-day cured specimens are presented. The novel version of the Goal Attainment Method is used for the optimizations, in which the procedures of high-order regression equations and the multi-objective desirability contents are included to obtain more accurate optimization results in terms of the controlling parameters of segregation, swelling, UCS, and flexural strength. The setting time and workability results from the mixtures having the optimized parameters are also presented to demonstrate the fluidity of the optimized mixtures. The addition of carbon fiber led to significant improvements in the segregation and swelling ratios, with gains of up to 35%. Moreover, the three-point flexural strength and unconfined compressive strength were enhanced by 278% and 54%, respectively. The paper specifically reveals that the incorporation of carbon fiber significantly improves the mixture quality characteristics of segregation and swelling as well as the parameters of flexural strength and UCS.

Downloads

Download data is not yet available.

References

Algin, H.M. (2016). Optimised design of jet-grouted raft using response surface method. Computers and Geotechnics, 74, 56-73. https://doi.org/10.1016/j.compgeo.2015.12.012

Algin, H.M. (2018). Optimised design of jet-grouted rafts subjected to nonuniform vertical loading. KSCE J Civ Eng 22, 494–508. https://doi.org/10.1007/s12205-017-0841-1

Anggraini, V., Asadi, A., Syamsir, A., & Huat, B. B. (2017). Three point bending flexural strength of cement treated tropical marine soil reinforced by lime treated natural fiber. Measurement, 111, 158-166. https://doi.org/10.1016/j.measurement.2017.07.045

ASTM C1609 / C1609M-19. (2019) Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Load-ing), ASTM International, West Conshohocken, PA. https://doi.org/10.1520/C1609_C1609M-19

ASTM C1610 / C1610M-17. (2017) Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique, ASTM Inter-national, West Conshohocken, PA. https://doi.org/10.1520/C1610_C1610M-17

ASTM D4546-14, Standard Test Methods for One-Dimensional Swell or Collapse of Soils, ASTM International, West Conshohocken, PA, 2014 https://doi.org/10.1520/D4546-14

ASTM C191-04b. (2004). Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle, ASTM International, West Conshohocken, PA. https://doi.org/10.1520/C0191-04B

ASTM D2166 / D2166M-16. (2016). Standard Test Method for UCS of Cohesive Soil, ASTM International, West Conshohocken, PA. https://doi.org/10.1520/D2166_D2166M-16

ASTM D 4767-88. (1993). Standard test method for consolidated-undrained triaxial compression test on cohesive soils. Annual book of ASTM standards, Philadelphia, PA, 04.08, 1071-1081.

Avci, Y., & Ekmen, A. B. (2023, October). Artificial intelligence assisted optimization of rammed aggregate pier supported raft foundation systems based on parametric three-dimensional finite element analysis. In Structures (Vol. 56, p. 105031). Elsevier.

Aydar, A. Y. (2018). Utilization of response surface methodology in optimization of extraction of plant materials. Statistical Approaches With Emphasis on Design of Experiments Applied to Chemical Processes. InTech, 157-169. https://doi.org/10.5772/intechopen.73690

Ben-Gal, I. (2005). On the use of data compression measures to analyze robust designs. IEEE Transactions on Reliability, 54(3), 381-388. https://doi.org/10.1109/TR.2005.853280

Bergado, D. T., Ruenkrairergsa, T., Taesiri, Y., & Balasubramaniam, A. S. (1999). Deep soil mixing used to reduce embankment settlement. Proceedings of the Institution of Civil Engineers-Ground Improvement, 3(4), 145-162. https://doi.org/10.1680/gi.1999.030402

Boehm, D. W. (2004). The utilization of jet grouting and soil mixing methods to repair and support bulkhead structures. In Ports 2004: Port Development in the Changing World (pp. 1-10). https://doi.org/10.1061/40727(2004)96

Broms, B. B. (1986). Stabilization of soft clay with lime and cement columns in Southeast Asia. Applied Research Project RP10/83, Nanyang Technologi-cal Institute, Singapore. https://hdl.handle.net/10356/46576

Bruce, M. E. C., Berg, R. R., Collin, J. G., Filz, G. M., Terashi, M., Yang, D. S., & Geotechnica, S. (2013). Federal Highway Administration design manual: Deep mixing for embankment and foundation support (No. FHWA-HRT-13-046). United States. Federal Highway Administation. Offices of Re-search & Development.

Chen, J., Lee, F. H., & Ng, C. C. (2011). Statistical analysis for strength variation of deep mixing columns in Singapore. In Geo-Frontiers 2011: Advances in Geotechnical Engineering (pp. 576-584). https://doi.org/10.1061/41165(397)60

Chen, Z. S., Zhou, X., Wang, X., & Guo, P. (2018). Mechanical behavior of multilayer GO carbon-fiber cement composites. Construction and Building Materials, 159, 205-212.https://doi.org/10.1016/j.conbuildmat.2017.10.094

Chen, F. (2016). Experiment research on tensile strength of basalt fiber cement-soil. Journal of Shenzhen University Science and Engineering, 33(2), 188-193.

Croce, P., Flora, A., & Modoni, G. (2014). Jet grouting: technology, design and control. CRC Press.

Danso, H., Martinson, D. B., Ali, M., & Williams, J. B. (2015). Physical, mechanical and durability properties of soil building blocks reinforced with natural fibres. Construction and Building Materials, 101, 797-809. https://doi.org/10.1016/j.conbuildmat.2015.10.069

Dehghanbanadaki, A., Rashid, A. S. A., Ahmad, K., Yunus, N. Z. M., & Motamedi, S. (2023). Deep soil mixing stabilisation of peat: a review of small-scale and 1 g physical modelling test results. Bulletin of Engineering Geology and the Environment, 82(5), 1-15.

Duan, X. L., & Zhang, J. S. (2019). Mechanical properties, failure mode, and microstructure of soil-cement modified with fly ash and polypropylene fiber. Advances in Materials Science and Engineering, 2019. https://doi.org/10.1155/2019/9561794

Ekmen, A. B. (2020). Three-dimensional lithological modelling of soils using field test results and utilisation of the developed method in numerical analysis of deep mixing columns. Ph. D. Thesis, Harran University, Civil Engineering Department, Turkey.

Ekmen, A. B., Algin, H. M., & Özen, M. (2020). Strength and stiffness optimisation of fly ash-admixed DCM columns constructed in clayey silty sand. Transportation Geotechnics, 24, 100364.

Ekmen, A. B. (2023). Evaluation of SPT-N values and internal friction angle correlation using artificial intelligence methods in granular soils. Soil Re-search.

Ekmen, A. B., & Avci, Y. (2023). Artificial Intelligence-Assisted Optimization of Tunnel Support Systems Based on the Multiple Three-Dimensional Finite Element Analyses Considering the Excavation Stages. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 47(3), 1725-1747.

Elkhebu, A., Zainorabidin, A., Asadi, A., Bakar, I. H., Huat, B. B., Abdeldjouad, L., & Dheyab, W. (2020). Effect of incorporating multifilament polypro-pylene fibers into alkaline activated fly ash soil mixtures. Soils and Foundations. https://doi.org/10.1016/j.sandf.2019.11.015

Flora, A., Modoni, G., Lirer, S., & Croce, P. (2013). The diameter of single, double and triple fluid jet grouting columns: prediction method and field trial results. Géotechnique, 63(11), 934-945. https://doi.org/10.1680/geot.12.P.062

Gao, L., Zhou, Q., Yu, X., Wu, K., & Mahfouz, A. H. (2017). Experimental study on the UCS of carbon fiber reinforced clay soil. Marine Georesources & Geotechnology, 35(1), 143-148. https://doi.org/10.1080/1064119X.2015.1102184

Gembicki, F. W. (1974). Vector optimization for control with performance and parameter sensitivity indices. Ph. D. thesis, Case Western Reserve Univ.

Golder Associates. (2013). High level geotechnical input: Fishermans Bend development. Rep. No. 127613038-003-R. Decatur, AL: Golder Associates.

Güllü, H., Canakci, H., & Al Zangana, I. F. (2017). Use of cement based grout with glass powder for deep mixing. Construction and Building Materials, 137, 12-20. https://doi.org/10.1016/j.conbuildmat.2017.01.070

Kafodya, I., & Okonta, F. (2018). Effects of natural fiber inclusions and pre-compression on the strength properties of lime-fly ash stabilised soil. Con-struction and Building Materials, 170, 737-746. https://doi.org/10.1016/j.conbuildmat.2018.02.194

Kamon, M. (1996, May). Effects of Grouting and DMM on Big Construction Projects In Japan and the 1995 Hyogoken-Nambu Earth Quake. In Proc. 2nd International Conference on Ground Improvement Geosystems, Tokyo,(2) (pp. 807-823).

Lai, Y. P., Bergado, D. T., Lorenzo, G. A., & Duangchan, T. (2006). Full-scale reinforced embankment on deep jet mixing improved ground. Proceedings of the Institution of Civil Engineers-Ground Improvement, 10(4), 153-164. https://doi.org/10.1680/grim.2006.10.4.153

Liu, G. P., Yang, J. B., & Whidborne, J. F. (2003). Multiobjective optimisation and control. Research Studies Press.

Liu, Y., He, L. Q., Jiang, Y. J., Sun, M. M., Chen, E. J., & Lee, F. H. (2019). Effect of in situ water content variation on the spatial variation of strength of deep cement-mixed clay. Géotechnique, 69(5), 391-405. https://doi.org/10.1680/jgeot.17.P.149

Liu, Y., Lee, F. H., Quek, S. T., Chen, E. J., & Yi, J. T. (2015). Effect of spatial variation of strength and modulus on the lateral compression response of cement-admixed clay slab. Géotechnique, 65(10), 851-865. https://doi.org/10.1680/jgeot.14.P.254

Lorenzo, G. A., & Bergado, D. T. (2004). Fundamental parameters of cement-admixed clay—New approach. Journal of geotechnical and geoenviron-mental engineering, 130(10), 1042-1050. https://doi.org/10.1061/(ASCE)1090-0241(2004)130:10(1042)

Lorenzo, G. A., & Bergado, D. T. (2006). Fundamental characteristics of cement-admixed clay in deep mixing. Journal of materials in civil engineering, 18(2), 161-174. https://doi.org/10.1061/(ASCE)0899-1561(2006)18:2(161)

Matlab, (2017). Matlab, version R2017a, MathWorks.

Miura, N., Horpibulsuk, S., & Nagaraj, T. S. (2001). Engineering behavior of cement stabilized clay at high water content. Soils and Foundations, 41(5), 33-45. https://doi.org/10.3208/sandf.41.5_33

Mohammadinia, A., Disfani, M. M., Conomy, D., Arulrajah, A., Horpibulsuk, S., & Darmawan, S. (2019). Utilization of Alkali-Activated Fly Ash for Construction of Deep Mixed Columns in Loose Sands. Journal of Materials in Civil Engineering, 31(10), 04019233. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002878

Mohammadinia, A., Arulrajah, A., Horpibulsuk, S., & Shourijeh, P. T. (2019). Impact of potassium cations on the light chemical stabilization of construc-tion and demolition wastes. Construction and Building Materials, 203, 69-74. https://doi.org/10.1016/j.conbuildmat.2019.01.083

Mohammadinia, A., Arulrajah, A., D'Amico, A., & Horpibulsuk, S. (2018). Alkali-activation of fly ash and cement kiln dust mixtures for stabilization of demolition aggregates. Construction and Building Materials, 186, 71-78. https://doi.org/10.1016/j.conbuildmat.2018.07.103

Myers RH, Montgomery DC, Anderson-Cook CM. (2009). Response Surface Methodology: Process and Product Optimization Using Designed Experi-ments: Wiley.

Olgun, M. (2013). Effects of polypropylene fiber inclusion on the strength and volume change characteristics of cement-fly ash stabilized clay soil. Geo-synthetics International, 20(4), 263-275. https://doi.org/10.1680/gein.13.00016

Porbaha, A. (1998). State of the art in deep mixing technology: part I. Basic concepts and overview. Proceedings of the Institution of Civil Engineers-Ground Improvement, 2(2), 81-92. https://doi.org/10.1680/gi.1998.020204

Porbaha, A., Shibuya, S., & Kishida, T. (2000). State of the art in deep mixing technology. Part III: geomaterial characterization. Proceedings of the Insti-tution of Civil Engineers-Ground Improvement, 4(3), 91-110. https://doi.org/10.1680/grim.2000.4.3.91

Pradeep G. (2008). Response surface method. Saarbrücken, Germany: VDM Verlag Publishing.

Ramadas, T. L., Kumar, N. D., & Aparna, G. (2010, December). Swelling and strength characteristics of expansive soil treated with stone dust and fly Ash. In Indian geotechnical conference (pp. 557-560).

Shahin, M. A., & Cargeeg, A. (2011). Experimental Investigation into Multistage versus Conventional Triaxial Compression Tests for a c-phi Soil. In Applied Mechanics and Materials (Vol. 90, pp. 28-32). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/AMM.90-93.28

Sharma, V., Vinayak, H. K., & Marwaha, B. M. (2015). Enhancing compressive strength of soil using natural fibers. Construction and Building Materials, 93, 943-949. https://doi.org/10.1016/j.conbuildmat.2015.05.065

Shen, S. L., Wang, Z. F., Yang, J., & Ho, C. E. (2013). Generalized approach for prediction of jet grout column diameter. Journal of Geotechnical and Geoenvironmental Engineering, 139(12), 2060-2069. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000932

Soranzo, M. (1988). Results and interpretation of multistage triaxial compression tests. In Advanced triaxial testing of soil and rock. ASTM International.

Sukontasukkul, P., & Jamsawang, P. (2012). Use of steel and polypropylene fibers to improve flexural performance of deep soil–cement column. Con-struction and Building Materials, 29, 201-205. https://doi.org/10.1016/j.conbuildmat.2011.10.040

Szymkiewicz, F., Tamga, F. S., Kouby, A. L., & Reiffsteck, P. (2013). Optimization of strength and homogeneity of deep mixing material by the determi-nation of workability limit and optimum water content. Canadian geotechnical journal, 50(10), 1034-1043. https://doi.org/10.1139/cgj-2012-0327

Terashi, M. (2005). Keynote lecture: design of deep mixing in infrastructure applications. In Proc. Int'l Conf on Deep Mixing-Best Practice and Recent Advances, 2005.

Tran, K. Q., Satomi, T., & Takahashi, H. (2018). Improvement of mechanical behavior of cemented soil reinforced with waste cornsilk fibers. Construc-tion and Building Materials, 178, 204-210. https://doi.org/10.1016/j.conbuildmat.2018.05.104

Wang, D., Wang, H., Larsson, S., Benzerzour, M., Maherzi, W., & Amar, M. (2020). Effect of basalt fiber inclusion on the mechanical properties and microstructure of cement-solidified kaolinite. Construction and Building Materials, 241, 118085. https://doi.org/10.1016/j.conbuildmat.2020.118085

Wang, D., Tawk, M., Indraratna, B., Heitor, A., & Rujikiatkamjorn, C. (2019). A mixture of coal wash and fly ash as a pavement substructure material. Transportation Geotechnics, 21, 100265. https://doi.org/10.1016/j.trgeo.2019.100265

Watabe, Y., Tsuchida, T., Furuno, T., & Yuasa, H. (2000). Mechanical characteristics of a cement treated dredged soil utilized for waste reclamation landfill. Coastal geotechnical engineering in practice, A. Nakasa and T. Tsuchida, eds., Balkema, Rotterdam, Netherlands, 739-745.

Wu, M., Zhao, X., & Dou, Y. M. (2005). Application of stiffened deep cement mixed column in ground improvement. In Proceedings international confer-ence on deep mixing best practices and recent advances, Stockholm, Sweden (pp. 463-468).

Yin, J. H. (2001). Stress-strain-strength characteristics of soft Hong Kong marine deposits without or with cement treatment. Lowland Technology Interna-tional, 3(1, June), 1-13.

Downloads

Published

2023-12-31

Versions

How to Cite

EKMEN, A. . B. ., & ALGIN, H. M. (2023). Optimization of fiber-reinforced deep cement-fly ash mixing column materials. Revista De La Construcción. Journal of Construction, 22(3), 707–728. https://doi.org/10.7764/RDLC.22.3.707