Mechanical properties of cement-based composites incorporating eco-friendly aggregate of waste rubber

Authors

  • H. Alperen Bulut Erzincan Binali Yıldırım University, Engineering and Architecture Faculty, Department of Civil Engineering, Erzincan (Turkey)
  • Ufuk Kandil Erzincan Binali Yıldırım University, Engineering and Architecture Faculty, Department of Civil Engineering, Erzincan (Turkey)

DOI:

https://doi.org/10.7764/RDLC.23.2.246

Keywords:

Rubberized concrete, compressive strength, ultrasonic pulse velocity, flexural strength, splitting tensile strength.

Abstract

The purpose of this study is to evaluate the waste tires that harm the environment as aggregate in concrete and to examine the effect on the mechanical properties of concrete. Three different classes (powder, crumb and chips) of waste rubber with seven different ratios (0%, 4%, 8%, 12%, 16%, 20% and 24%) and two different water to cement ratio (0.4 and 0.5) were used in concrete production. In this regard, this study conducted various experiments consisting of 28 and 90 days of the curing process to determine the properties of unit weight, compressive, flexural, and splitting tensile strength, along with ultrasonic pulse velocity (UPV) and dynamic modulus of elasticity. The waste rubber concrete with the highest compressive strength at the end of 90 days is the concrete that includes 4% waste rubber (0.4WR4) with 58.81 MPa. Concrete containing 8% waste rubber has the highest UPV of 5660 m/s after 90 days. The increase in the water/cement ratio from 0.4 to 0.5 and the waste rubber ratio cause deterioration in the mechanical properties of concrete. Although the use of waste rubbers does not bring an increase in strength, it is feasible to produce high strength concretes with 4% and 8% waste rubber substitution ratios. The water/cement ratio and curing time were highly effective on the mechanical properties of rubberized concrete.

Downloads

Download data is not yet available.

References

Adeboje, A. O., Kupolati, W. K., Sadiku, E. R., Ndambuki, J. M., & Kambole, C. (2020). Experimental investigation of modified bentonite clay-crumb rubber concrete. Construction and Building Materials, 233, 117187.

Aiello, M. A., & Leuzzi, F. (2010). Waste tyre rubberized concrete: Properties at fresh and hardened state. Waste Management, 30(8-9), 1696-1704.

Alaloul, W. S., Musarat, M. A., Haruna, S, Tayeh, B. A., & Norizan, M. N. B. (2021). Chemical attack on concrete containing a high volume of crumb rubber as a partial replacement for fine aggregate in engineered cementitious composite (ECC). Canadian Journal of Civil Engineering, 49, 1.

Alam, I., Mahmood U. A., & Khattak, N. (2015). Use of rubber as aggregate in concrete: A review. International Journal of Advanced Structures and Geotechnical Engineering, 4(2), 92-96.

Aliabdo, A. A., Elmoaty, A. E. M. A., & AbdElbaset, M. M. (2015). Utilization of waste rubber in non-structural applications. Construction and Building Materials, 91, 195-207.

Alsaif, A, Bernal, S. A., Guadagnini, M., & Pilakoutas, K. (2018a). Durability of steel fibre reinforced rubberized concrete exposed to chlorides. Construc-tion and Building Materials, 188, 130-142.

Alsaif, A., Koutas, L., Bernal, S. A., Guadagnini, M., & Pilakoutas, K. (2018b). Mechanical performance of steel fibre reinforced rubberised concrete for flexible concrete pavements. Construction and Building Materials, 172, 533–543.

Al-Tayeb, M. M., Bakar, B. H. A., Ismail, H., & Akil, H. M. (2012). Impact resistance of concrete with partial replacements of sand and cement by waste rubber. Polymer-Plastics Technology and Engineering, 51(12), 1230-1236.

Angelin, A. F., Miranda, Jr. E. J. P., Santos, J. M. C. D., Lintz, R. C. C., & Gachet-Barbosa, L. A. (2019). Rubberized mortar: The influence of aggregate granulometry in mechanical resistances and acoustic behavior. Construction and Building Materials, 200, 248-254.

Aslani, F. (2016). Mechanical properties of waste tire rubber concrete. Journal of Materials in Civil Engineering, 28(3), 04015152.

Aslani, F., & Khan, M. (2019). Properties of high-performance self-compacting rubberized concrete exposed to high temperatures. Journal of Materials in Civil Engineering, 31(5), 04019040.

Assaggaf, R. A., Ali, M. R., Al-Dulaijan, S. U., & Maslehuddin, M. (2021). Properties of concrete with untreated and treated crumb rubber – A review. Journal of Materials Research and Technology, 11, 1753-1798.

ASTM C597. (2016). Standard Test Method for Pulse Velocity Through Concrete. ASTM International, West Conshohocken, PA, USA.

ASTM C143. (2020). Standard Test Method for Slump of Hydraulic-Cement Concrete. ASTM International, West Conshohocken, PA, USA.

Azevedo, F., Pacheco-Torgal, F., Jesus, C., Aguiar, J. L. B., & Camões, A. F. (2012). Properties and durability of HPC with tyre rubber wastes. Construction and Building Materials, 34, 186-191.

Bala, A., & Gupta, S. (2021). Thermal resistivity, sound absorption and vibration damping of concrete composite doped with waste tire Rubber: A review. Construction and Building Materials, 299, 123939.

Batayneh, M. K., Marie, I., & Asi, I. (2008). Promoting the use of crumb rubber concrete in developing countries. Waste Management, 28(11), 2171-2176.

Bideci, A., Öztürk, H., Bideci, Ö. S., & Emiroğlu, M. (2017). Fracture energy and mechanical characteristics of self-compacting concretes including waste bladder tyre. Construction and Building Materials, 149, 669-678.

Bisht, K., & Ramana, P. V. (2017). Evaluation of mechanical and durability properties of crumb rubber concrete. Construction and Building Materials, 155, 811-817.

Bisht, K., & Ramana, P. V. (2019). Waste to resource conversion of crumb rubber for production of sulphuric acid resistant concrete. Construction and Building Materials, 194, 276-286.

Bompa, D. V., Elghazouli, A. Y., Xu, B., Stafford, P. J., & Ruiz-Teran, A. M. (2017). Experimental assessment and constitutive modelling of rubberised concrete materials. Construction and Building Materials, 137, 246-260.

Bravo, M., & Brito, J. (2012). Concrete made with used tyre aggregate: durability related performance. Journal of Cleaner Production, 25, 42-50.

Bušić, R., Miličević, I., Šipoš, T. K., & Strukar, K. (2018). Recycled bubber as an aggregate replacement in self-compacting concrete-literature overview. Materials, 11(9), 1729.

Chen, Z., Li, L., & Xiong, Z. (2019). Investigation on the interfacial behaviour between the rubber-cement matrix of the rubberized concrete. Journal of Cleaner Production, 209, 1354-1364.

Dehdezi, P. K., Erdem, S., & Blankson, M. A. (2015). Physico-mechanical, microstructural and dynamic properties of newly developed artificial fly ash based lightweight aggregate – Rubber concrete composite. Composites Part B: Engineering, 79, 451-455.

Dong, Q., Huang, B., & Shu, X. (2013). Rubber modified concrete improved by chemically active coating and silane coupling agent. Construction and Building Materials, 48, 116-123.

Duarte, A. P. C., Silva, B. A., Silvestre, N., Brito, J., Júlio, E., & Castro, J. M. (2016). Tests and design of short steel tubes filled with rubberised concrete. Engineering Structures, 112, 274-286.

Elchalakani, M. (2015). High strength rubberized concrete containing silica fume for the construction of sustainable road side barriers. Structure, 1, 20-38.

Eltayeb, E., Ma, X., Zhuge, Y., Xiao, J., & Youssf, O. (2021). Dynamic performance of rubberised concrete and its structural applications-An overview. Engineering Structures, 234, 111990.

Ferdous, W., Manalo, A., Siddique, R., Mendis, P., Zhuge, Y., Wong, H. S., Lokuge, W., Aravinthan, T., & Schubel, P. (2021). Recycling of landfill wastes (tyres, plastics and glass) in construction-A review on global waste generation, performance, application and future opportunities. Resources, Con-servation and Recycling, 173, 105745.

Figueiredo, F. P., Shah, A. H., Huang, S., Angelakopoulos, H., Pilakoutas, K., & Burgess, I. (2017). Fire protection of concrete tunnel linings with waste tyre fibres. Procedia Engineering, 210, 472-478.

Ganjian, E., Khorami, M., & Maghsoudi, A. A. (2009). Scrap-tyre-rubber replacement for aggregate and filler in concrete. Construction and Building Materials, 23(5), 1828-1836.

Gesoğlu, M., Güneyisi, E., Khoshnaw, G., & İpek, S. (2014). Investigating properties of pervious concretes containing waste tire rubbers. Construction and Building Materials, 63, 206-213.

Gheni, A. A., ElGawady, M. A., & Myers, J. J. (2017). Mechanical characterization of concrete masonry units manufactured with crumb rubber aggregate. ACI Materials Journal, 114(1), 65-76.

Girskas, G., & Nagrockienė, D. (2017). Crushed rubber waste impact of concrete basic properties. Construction and Building Materials, 140, 36-42.

Gonen, T. (2018). Freezing-thawing and impact resistance of concretes containing waste crumb rubbers. Construction and Building Materials, 177, 436-442.

Guíñez, F., María, H. S., Araya-Letelier, G., Lincoleo, J., & Palominos, F. (2024). Effect of mix dosage on rubberized concrete mechanical performance: A multivariable prediction model towards design provisions. Journal of Building Engineering, 90, 109451.

Guo, Y., Zhang, J., Chen, G., & Xie, Z. (2014). Compressive behaviour of concrete structures incorporating recycled concrete aggregates, rubber crumb and reinforced with steel fibre, subjected to elevated temperatures. Journal of Cleaner Production, 72, 193-203.

Gupta, T., Chaudhary, S., & Sharma, R. K. (2014). Assessment of mechanical and durability properties of concrete containing waste rubber tire as fine aggregate. Construction and Building Materials, 73, 562-574.

Gupta, T., Chaudhary, S., & Sharma, R. K. (2016). Mechanical and durability properties of waste rubber fiber concrete with and without silica fume. Journal of Cleaner Production, 112(1), 702-711.

Gupta, T., Siddique, S., Sharma, R. K., & Chaudhary, S. (2019). Behaviour of waste rubber powder and hybrid rubber concrete in aggressive environment. Construction and Building Materials, 217, 283–291.

Güneyisi, E., Gesoglu, M., Naji, N., & İpek, S. (2016). Evaluation of the rheological behavior of fresh self-compacting rubberized concrete by using the Herschel–Bulkley and modified Bingham models. Archives of Civil and Mechanical Engineering, 16(1), 9-19.

Habib, A., Yildirim, U., & Eren, O. (2020). Mechanical and dynamic properties of high strength concrete with well graded coarse and fine tire rubber. Construction and Building Materials, 246, 118502.

Hamdi, A., Abdelaziz, G., & Farhan, K. Z. (2021). Scope of reusing waste shredded tires in concrete and cementitious composite materials: A review. Journal of Building Engineering, 35, 102014.

Hassanli, R., Mills, J. E., Li, D., & Benn, T. (2017). Experimental and numerical study on the behavior of rubberized concrete. Advances in Civil Engineer-ing Materials, 6(1), 20160026.

Hernández-Olivares, F., Barluenga, G., Bollati, M., & Witoszek, B. (2002). Static and dynamic behaviour of recycled tyre rubber-filled concrete. Cement and Concrete Research, 32, 1587–1596.

Hesami, S., Hikouei, I. S., & Emadi, S. A. A. (2016). Mechanical behavior of self-compacting concrete pavements incorporating recycled tire rubber crumb and reinforced with polypropylene fiber. Journal of Cleaner Production, 133, 228-234.

Hilal, N. N. (2017). Hardened properties of self-compacting concrete with different crumb rubber size and content. International Journal of Sustainable Built Environment, 6(1), 191-206.

Holmes, N., Browne, A., & Montague, C. (2014). Acoustic properties of concrete panels with crumb rubber as a fine aggregate replacement. Construction and Building Materials, 73, 195-204.

IS 13311. (1992). Part 1, Non-destructive testing of concrete - Methods of Test - Ultrasonic pulse velocity. Indian Standard.

Ismail, M. K., & Hassan, A. A. A. (2016). Use of metakaolin on enhancing the mechanical properties of self-consolidating concrete containing high per-centages of crumb rubber. Journal of Cleaner Production, 125, 282-295.

Kandil, U., & Bulut, H. A. (2024). Examination of the permeability of rubberized concrete with different water/cement ratios and their resistance against acid and sulfate attack. Progress in Rubber, Plastics and Recycling Technology, 40(3), 320-339.

Keerio, M. A., Abbasi, S. A., Kumar, A., Bheel, N., Rehaman, K., & Tashfeen, M. (2020). Effect of silica fume as cementitious material and waste glass as fine aggregate replacement constituent on selected properties of concrete. Silicon, 14, 165-176.

Khaloo, A. R., Dehestani, M., & Rahmatabadi, P. (2008). Mechanical properties of concrete containing a high volume of tire–rubber particles. Waste Management, 28(12), 2472-2482.

Khatib, Z. K., & Bayomy, F. M. (1999). Rubberized Portland cement concrete. Journal of Materials in Civil Engineering, 11(3), 206-213.

Khorrami, M., Vafai, A., Khalilitabas, A., Desai, C. S., & Ardakani, M. H. M. (2010). Experimental investigation on mechanical characteristics and envi-ronmental effects on rubber concrete. International Journal of Concrete Structures and Materials, 4(1), 17-23.

Kundan, P., & Sharma, S. (2021). Rubberized cemented concrete composites: A review. Materials Today: Proceedings, 44(6), 4838-4842.

Li, W., Huang, Z., Wang, X. C., & Wang, J. W. (2014). Review of crumb rubber concrete. Applied Mechanics and Materials: Trans Tech Publ, 672, 1833–1837.

Li, D., Mills, J. E., Benn, T., Ma, X., Gravina, R. J., & Zhuge, Y. (2016). Review of the performance of high-strength rubberized concrete and its potential structural applications. Advances in Civil Engineering Materials, 5(1), 20150026.

Li, B. (2017). Material property test and vibration reduction performance prediction of rubberized concrete roadbed. MS Thesis. Tianjin University, Tian-jin, China, (in Chinese).

Li, Y., Zhang, S., Wang, R., & Dang, F. (2019). Potential use of waste tire rubber as aggregate in cement concrete- A comprehensive review. Construction and Building Materials, 225, 1183-1201.

Lv, J., Zhou, T., Du, Q., & Wu, H. (2015). Effects of rubber particles on mechanical properties of lightweight aggregate concrete. Construction and Building Materials, 91, 145-149.

Marie, I. (2016). Zones of weakness of rubberized concrete behavior using the UPV. Journal of Cleaner Production, 116, 217-222.

Meddah, A., Bensaci, H., Beddar, M., & Bali, A. (2017). Study of the effects of mechanical and chemical treatment of rubber on the performance of rubberized roller-compacted concrete pavement. Innovative Infrastructure Solutions, 2, 1-5.

Mendis, A. S. M., Al-Deen, S., & Ashraf, M. (2017). Behaviour of similar strength crumbed rubber concrete (CRC) mixes with different mix proportions. Construction and Building Materials, 137, 354-366.

Mohajerani, A., Burnett, L., Smith, J. V., Markovski, S., Rodwell, G., Rahman, M. T., Kurmus, H., Mirzababaei, M., Arulrajah, A., Horpibulsuk, S., & Maghool, F. (2020). Recycling waste rubber tyres in construction materials and associated environmental considerations: A review. Resources, Con-servation and Recycling, 155, 104679.

Mohammadi, I., Khabbaz, H., & Vessalas, K. (2014). In-depth assessment of Crumb Rubber Concrete (CRC) prepared by water-soaking treatment meth-od for rigid pavements. Construction and Building Materials, 71, 456-471.

Mohammadi, I., Khabbaz, H., & Vessalas, K. (2016). Enhancing mechanical performance of rubberised concrete pavements with sodium hydroxide treatment. Materials and Structures, 49, 813–827.

Mousavimehr, M., & Nematzadeh, M. (2019). Predicting post-fire behavior of crumb rubber aggregate concrete. Construction and Building Materials, 229, 116834.

Moustafa, A., & ElGawady, M. A. (2015). Mechanical properties of high strength concrete with scrap tire rubber. Construction and Building Materials, 93, 249-256.

Mundo, R. D., Petrella, A., & Notarnicola, M. (2018). Surface and bulk hydrophobic cement composites by tyre rubber addition. Construction and Build-ing Materials, 172, 176-184.

Najim, K. B., & Hall, M. R. (2010). A review of the fresh/hardened properties and applications for plain-(PRC) and self-compacting rubberised concrete (SCRC). Construction and Building Materials, 24, 2043-2051.

Najim, K. B., & Hall, M. R. (2012). Mechanical and dynamic properties of self-compacting crumb rubber modified concrete. Construction and Building Materials, 27(1), 521-530.

Noor, N. M., Hamada, H., Sagawa, Y., & Yamamoto, D. (2015). Effect of crumb rubber on concrete strength and chloride ion penetration resistance. Jurnal Teknologi, 77, 171-178.

Onuaguluchi, O., & Panesar, D. K. (2014). Hardened properties of concrete mixtures containing pre-coated crumb rubber and silica fume. Journal of Cleaner Production, 82, 125-131.

Pacheco-Torgal, F., Ding, Y., & Jalali, S. (2012). Properties and durability of concrete containing polymeric wastes (tyre rubber and polyethylene tereph-thalate bottles): An overview. Construction and Building Materials, 30, 714-724.

Pacheco-Torres, R., Cerro-Prada, E., Escolano, F., & Varela, F. (2018). Fatigue performance of waste rubber concrete for rigid road pavements. Construc-tion and Building Materials, 176, 539-548.

Pelisser, F., Zavarise, N., Longo, A. H., & Bernardin, A. M. (2011). Concrete made with recycled tire rubber: Effect of alkaline activation and silica fume addition. Journal of Cleaner Production, 19(6-7), 757-763.

Pham, N. P., Toumi, A., & Turatsinze, A. (2018). Rubber aggregate-cement matrix bond enhancement: Microstructural analysis, effect on transfer proper-ties and on mechanical behaviours of the composite. Cement and Concrete Composites, 94, 1-12.

Qaidi, S. M. A., Dinkha, Y. Z., Haido, J. H., Ali, M. H., & Tayeh, B. A. (2021). Engineering properties of sustainable green concrete incorporating eco-friendly aggregate of crumb rubber: A review. Journal of Cleaner Production, 324, 129251.

Raffoul, S., Garcia, R., Pilakoutas, K., Guadagnini, M., & Medina, N. F. (2016). Optimisation of rubberized concrete with high rubber content: An experi-mental investigation. Construction and Building Materials, 124, 391-404.

Ramdani, S., Guettala, A., Benmalek, M. L., & Aguiar, J. B. (2019). Physical and mechanical performance of concrete made with waste rubber aggregate, glass powder and silica sand powder. Journal of Building Engineering, 21, 302-311.

Rao, S. K., Sravana, P., & Rao, T. C. (2016). Experimental studies in ultrasonic pulse velocity of roller compacted concrete pavement containing fly ash and M-sand. International Journal of Pavement Research and Technology, 9(4), 289-301.

Rashad, A. M. (2016). A comprehensive overview about recycling rubber as fine aggregate replacement in traditional cementitious materials. International Journal of Sustainable Built Environment, 5(1), 46-82.

Rivas-Vázquez, L. P., Suárez-Orduña, R., Hernández-Torres, J., & Aquino-Bolaños, E. (2015). Effect of the surface treatment of recycled rubber on the mechanical strength of composite concrete/rubber. Materials and Structures, 48(9), 2809-2814.

Roychand, R., Gravina, R. J., Zhuge, Y., Ma, X., Youssf, O., & Mills, J. E. (2020). A comprehensive review on the mechanical properties of waste tire rubber concrete. Construction and Building Materials, 237, 117651.

Salehuddin, S., Rahim, N. L., Ibrahim, N. M., Tajri, S. A. N., & Abidin, M. Z. Z. (2015). The behaviour of rubber tyre as fine aggregate in concrete mix. Applied Mechanics and Materials, (754-755), 427-431.

Shu, X., & Huang, B. (2014). Recycling of waste tire rubber in asphalt and portland cement concrete: An overview. Construction and Building Materials, 67(B), 217-224.

Siddika, A., Mamun, M. A. A., Alyousef, R., Amran, Y. H. M., Aslani, F., & Alabduljabbar, H. (2019). Properties and utilizations of waste tire rubber in concrete: A review. Construction and Building Materials, 224, 711-731.

Siddique, R., & Naik, T. R. (2004). Properties of concrete containing scrap-tire rubber – an overview. Waste Management, 24(6), 563-569.

Snelson, D. G., Kinuthia, J. M., Davies, P. A., & Chang, S. R. (2009). Sustainable construction: Composite use of tyres and ash in concrete. Waste Man-agement, 29(1), 360-367.

Son, K. S., Hajirasouliha, I., & Pilakoutas, K. (2011). Strength and deformability of waste tyre rubber-filled reinforced concrete columns. Construction and Building Materials, 25(1), 218-226.

Stallings, K. A., Durham, S. A., & Chorzepa, M. G. (2019). Effect of cement content and recycled rubber particle size on the performance of rubber-modified concrete. International Journal of Sustainable Engineering, 12(3), 189-200.

Su, H., Yang, J., Ling, T., Ghataora, G. S., & Dirar, S. (2015). Properties of concrete prepared with waste tyre rubber particles of uniform and varying sizes. Journal of Cleaner Production, 91, 288-296.

Taha, M. M. R., El-Dieb, A. S., El-Wahab, M. A. A., & Abdel-Hameed, M. E. (2008). Mechanical, fracture, and microstructural investigations of rubber concrete. Journal of Materials in Civil Engineering, 20(10), 640-649.

Thakare, A.A., Singh, A., Gupta, V., Siddique, S., & Chaudhary, S. (2021). Sustainable development of self-compacting cementitious mixes using waste originated fibers: A review. Resources, Conservation and Recycling, 168, 105250.

Thakur, A., Senthil, K., Sharma, R., & Singh, A. P. (2020). Employment of crumb rubber tyre in concrete masonry bricks. Materials Today: Proceedings, 32(4), 553-559.

Thomas, B. S., Gupta, R. C., Kalla, P., & Cseteneyi, L. (2014). Strength, abrasion and permeation characteristics of cement concrete containing discarded rubber fine aggregates. Construction and Building Materials, 59, 204-212.

Thomas, B. S., & Gupta, R. C. (2015). Long term behaviour of cement concrete containing discarded tire rubber. Journal of Cleaner Production, 102, 78-87.

Thomas, B. S., & Gupta, R. C. (2016). Properties of high strength concrete containing scrap tire rubber. Journal of Cleaner Production, 113, 86-92.

Thomas, B. S., Kumar, S., Mehra, P., Gupta, R. C., Joseph, M., & Csetenyi, L. J. (2016). Abrasion resistance of sustainable green concrete containing waste tire rubber particles. Construction and Building Materials, 124, 906–909.

Thomaz, W. A., Miyaji, D. Y., & Possan, E. (2021). Comparative study of dynamic and static Young's modulus of concrete containing basaltic aggregates. Case Studies in Construction Materials, 15, e00645.

Toutanji, H. A. (1996). The use of rubber tire particles in concrete to replace mineral aggregates. Cement and Concrete Composites, 18(2), 135-139.

TS EN 12390-6. (2010). Testing hardened concrete - Part 6: Tensile splitting strength of test specimens. Turkish Standards Institution, Ankara, Turkey (Turkish Codes).

TS EN 197-1. (2012). Cement- Part 1: Composition, specification and conformity criteria for common cements. Turkish Standards Institution, Ankara, Turkey (Turkish Codes).

TS 802. (2016). Design of concrete mixes. Turkish Standards Institution, Ankara, Turkey (Turkish Codes).

TS EN 12350-6. (2019). Testing fresh concrete - Part 6: Density. Turkish Standards Institution, Ankara, Turkey (Turkish Codes).

TS EN 12390-3. (2019). Testing hardened concrete - Part 3: Compressive strength of test specimens. Turkish Standards Institution, Ankara, Turkey (Turk-ish Codes).

TS EN 12390-5. (2019). Testing hardened concrete - Part 5: Flexural strength of test specimens. Turkish Standards Institution, Ankara, Turkey (Turkish Codes).

Wang, J., Dai, Q., Si, R., & Guo, S. (2019). Mechanical, durability, and microstructural properties of macro synthetic polypropylene (PP) fiber-reinforced rubber concrete. Journal of Cleaner Production, 234, 1351-1364.

Xu, J., Yao, Z., Yang, G., & Han, Q. (2020). Research on crumb rubber concrete: From a multi-scale review. Construction and Building Materials, 232, 117282.

Xue, J., & Shinozuka, M. (2013). Rubberized concrete: A green structural material with enhanced energy-dissipation capability. Construction and Building Materials, 42, 196-204.

Yang, G., Chen, X., Guo, S., & Xuan, W. (2019). Dynamic mechanical performance of self-compacting concrete containing crumb rubber under high strain rates. KSCE Journal of Civil Engineering, 23(8), 3669-3681.

Yung, W. H., Yung, L. C., & Hua, L. H. (2013). A study of the durability properties of waste tire rubber applied to self-compacting concrete. Construction and Building Materials, 41, 665-672.

Záleská, M., Pavlík, Z., Čítek, D., Jankovský, O., & Pavlíková, M. (2019). Eco-friendly concrete with scrap-tyre-rubber-based aggregate – Properties and thermal stability. Construction and Building Materials, 225, 709-722.

Zhang, H., Gou, M., Liu, X., & Guan, X. (2014). Effect of rubber particle modification on properties of rubberized concrete. Journal of Wuhan University of Technology-Mater. Sci. Ed, 29, 763–768.

Downloads

Published

2024-08-30

How to Cite

Bulut, H. A., & Kandil, U. (2024). Mechanical properties of cement-based composites incorporating eco-friendly aggregate of waste rubber. Revista De La Construcción. Journal of Construction, 23(2), 246–270. https://doi.org/10.7764/RDLC.23.2.246