Feasibility study of using waste badminton string fibers in con-crete by morphological, microstructural and tensile characteristics
DOI:
https://doi.org/10.7764/RDLC.22.3.679Keywords:
Waste badminton string fiber, recycled synthetic fiber, microstructural study, concrete applications, polyamide 6,6.Abstract
As the strings are cut off from the badminton racquet system, the whole string will be replaced with a new one and there is no other alternative. Hence those cut-off strings are considered as waste and cannot be recycled, tons of waste are retained as debris. Among many research on recycled synthetic fiber, this application of waste material is a new context in sustainable construction. Here five different samples are examined based on wide usage, recycled Waste Badminton String Fiber (WBSF) is characterized and physically examined using a Scanning Electron Microscope, Fourier Transform Infrared Spectroscopy, and X-ray diffraction to use it as a recycled synthetic fiber in various fiber reinforced concrete applications. The diameter and cross-sectional area of WBSF are studied using the Scanning Electron Microscope imaging technique and Image J application, which shows that the fiber is highly engineered with 3 layers namely elasticity outer, outer layer, and core fiber with the mean diameter and net cross-sectional area is 777.6 µm and 5,05,959 µm2 respectively. The surface roughness of fiber is analyzed using ImageJ application which varies between 16-32 nm. The fiber samples are subjected to tensile loading the average tensile stress lies between 544.34 - 639.94 MPa. From the above examinations, the accurate diameter, net cross-sectional area, and voided area of the WBSF are calculated. The structural property and polymer relationship of the fiber are investigated using the X-ray diffraction technique and Fourier transform infrared spectroscopy, this reveals that the WBSF is of polyamide 6,6 form. The superior tensile stress compared to other recycled nylon fibers. So, the use of waste badminton string fiber in concrete is a new merging idea for fiber-reinforced concrete applications like pavements, pipes, tunnel lining, and other structural elements.
Downloads
References
Antonova, Anna, Marika Eik, Ville Jokinen, and Jari Puttonen. 2021. “Effect of the Roughness of Steel Fibre Surface on Its Wettability and the Cement Paste Close to Fibre Surface.” Construction and Building Materials 289:123139. doi: 10.1016/j.conbuildmat.2021.123139.
ASTM C1557−14; Standard Test Method for Tensile Strength and Young’s Modulus of Fibers. ASTM International: West Conshohocken, PA, USA, 2015.
Criado, M., I. García-díaz, J. M. Bastidas, F. J. Alguacil, F. A. López, and C. Monticelli. 2015. “Effect of Recycled Glass Fiber on the Corrosion Behavior of Reinforced Mortar.” Construction and Building Materials 64(2014):261–69. doi: 10.1016/j.conbuildmat.2014.04.049.
Farooq, Muhammad Ahmad, Muhammad Fahad, Babar Ali, Shahid ullah, Mohamed Hechmi El Ouni, and Ahmed Babeker Elhag. 2022. “Influence of Nylon Fibers Recycled from the Scrap Brushes on the Properties of Concrete: Valorization of Plastic Waste in Concrete.” Case Studies in Construction Materials 16(March):e01089. doi: 10.1016/j.cscm.2022.e01089.
Fashandi, Hossein, Hamid Reza Pakravan, and Masoud Latifi. 2019. “Application of Modified Carpet Waste Cuttings for Production of Eco-Efficient Lightweight Concrete.” Construction and Building Materials 198:629–37. doi: 10.1016/j.conbuildmat.2018.11.163.
Fornes, T. D., and D. R. Paul. 2003. “Crystallization Behavior of Nylon 6 Nanocomposites.” Polymer 44(14):3945–61. doi: 10.1016/S0032-3861(03)00344-6.
Gopinath, Ajith, M. Senthilkumar, and Avinash Babu. 2018. “Evaluation of Mechanical Properties and Microstructure of Polyester and Epoxy Resin Matrices Reinforced with Jute, E-Glass and Coconut Fiber.” Materials Today: Proceedings 5(9):20092–103. doi: 10.1016/j.matpr.2018.06.376.
Hilal, Ameer A. 2021. “Effect of Aggregate Roughness on Strength and Permeation Characteristics of Lightweight Aggregate Concrete.” Journal of Engineering (United Kingdom) 2021. doi: 10.1155/2021/9505625.
Kanan, Mohammad, Bechir Wannassi, Ahmad S. Barham, Mohamed Ben Hassen, and Ramiz Assaf. 2022. “The Quality of Blended Cotton and Denim Waste Fibres: The Effect of Blend Ratio and Waste Category.” Fibers 10(9). doi: 10.3390/fib10090076.
Khan, Anish, R. Vijay, D. Lenin Singaravelu, M. R. Sanjay, Suchart Siengchin, Francis Verpoort, Khalid Ahmad Alamry, and Abdullah M. Asiri. 2021. “Characterization of Natural Fibers from Cortaderia Selloana Grass (Pampas) as Reinforcement Material for the Production of the Composites.” Journal of Natural Fibers 18(11):1893–1901. doi: 10.1080/15440478.2019.1709110.
Kumaresan, M., S. Sindhu Nachiar, and S. Anandh. 2022. “Implementation of Waste Recycled Fibers in Concrete: A Review.” Materials Today: Proceedings 68:1988–94. doi: 10.1016/j.matpr.2022.08.228.
M, Kumaresan, S. Sindhu Nachiar, and Anandh Sekar. 2023. “Engineering Properties of Waste Badminton String Fiber.” Fibers 11(3):25. doi: 10.3390/fib11030025.
Madhu, P., M. R. Sanjay, P. Senthamaraikannan, S. Pradeep, S. S. Saravanakumar, and B. Yogesha. 2019. “A Review on Synthesis and Characterization of Commercially Available Natural Fibers: Part II.” Journal of Natural Fibers 16(1):25–36. doi: 10.1080/15440478.2017.1379045.
Maria, Ida, Gieysztor Bertelsen, and Lisbeth M. Ottosen. n.d. Engineering Properties of Fibres from Waste Fishing Nets Materials, Systems and Structures in Civil Engineering Circular Ocean.
Mazzoli, Alida, Saveria Monosi, and Eleonora Stella Plescia. 2015. “Evaluation of the Early-Age-Shrinkage of Fiber Reinforced Concrete (FRC) Using Image Analysis Methods.” Construction and Building Materials 101:596–601. doi: 10.1016/j.conbuildmat.2015.10.090.
Mohammadhosseini, Hossein, Mahmood Md Tahir, and M. I. Sayyed. 2018. “Strength and Transport Properties of Concrete Composites Incorporating Waste Carpet Fibres and Palm Oil Fuel Ash.” Journal of Building Engineering 20:156–65. doi: 10.1016/j.jobe.2018.07.013.
Munawar, Sasa Sofyan, Kenji Umemura, and Shuichi Kawai. 2007. “Characterization of the Morphological, Physical, and Mechanical Properties of Seven Nonwood Plant Fiber Bundles.” Journal of Wood Science 53(2):108–13. doi: 10.1007/s10086-006-0836-x.
Naik, Dayakar L., Achintyamugdha Sharma, Rajender Reddy Chada, Ravi Kiran, and Todd Sirotiak. 2019. “Modified Pullout Test for Indirect Characterization of Natural Fiber and Cementitious Matrix Interface Properties.” Construction and Building Materials 208:381–93. doi: 10.1016/j.conbuildmat.2019.03.021.
Pachideh, Ghasem, and Majid Gholhaki. 2020. “An Experimental Study on the Performance of Fine-Grained Concrete Incorporating Recycled Steel Spring Exposed to Acidic Conditions.” Advances in Structural Engineering 23(11):2458–70. doi: 10.1177/1369433220915794.
Paiva, M. C. 2007. “SCIENCE AND Alfa Fibres : Mechanical , Morphological and Interfacial Characterization.” 67:1132–38. doi: 10.1016/j.compscitech.2006.05.019.
Park, Jun Kil, Min Ook Kim, and Dong Joo Kim. 2020. “Pullout Behavior of Recycled Waste Fishing Net Fibers Embedded in Cement Mortar.” Materials 13(18). doi: 10.3390/MA13184195.
Spadea, Saverio, Ilenia Farina, Anna Carrafiello, and Fernando Fraternali. 2015. “Recycled Nylon Fibers as Cement Mortar Reinforcement.” Construction and Building Materials 80:200–209. doi: 10.1016/j.conbuildmat.2015.01.075.
Srimahachota, Teeranai, Haruka Matsuura, Shun Yamaguchi, and Hiroshi Yokota. 2020. “Influences of Nylon Fiber Geometries and Contents on Mechanical Behavior of Reinforced Mortar.” Journal of Asian Concrete Federation 6(2):14–23. doi: 10.18702/acf.2020.12.6.2.14.
Suchorab, Zbigniew, Malgorzata Franus, and Danuta Barnat-Hunek. 2020. “Properties of Fibrous Concrete Made with Plastic Optical Fibers from E-Waste.” Materials 13(10):1–25. doi: 10.3390/ma13102414.
Vasanthan, N. 2012. “Crystallinity Determination of Nylon 66 by Density Measurement and Fourier Transform Infrared (FTIR) Spectroscopy.” 16–19.
Vasanthan, N., and D. R. Salem. 2001. “FTIR Spectroscopic Characterization of Structural Changes in Polyamide-6 Fibers during Annealing and Drawing.” (August 2000):536–47.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Kumaresan M, Sindhu Nachiar S, Anandh Sekar
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
