Investigating the effect of elevated temperatures on the utiliza-tion of demolished paving block powders as supplementary cementitious materials
DOI:
https://doi.org/10.7764/RDLC.23.1.151Abstract
The study investigated the effects of construction waste powders exposed to elevated temperatures on the properties of cement mortar. The waste powders were obtained from demolished granite and clay blocks after more than 15 years of their service life. The exposure temperatures were 200 °C, 400 °C, 600 °C, and 800 °C. The heat-treated and untreated waste powders replaced cement in mortars at 10% and 20% by weight. The use of untreated recycled granite and clay powders adversely affected the mechanical strength and transport properties of the cementitious mixtures. On the other hand, the effects of thermal exposure varied for the two powder materials. As the exposure temperature increased, the performance of mixtures containing granite powder gradually deteriorated, while mixtures containing clay powder improved. The efficiency was both worst and best at 800 °C. For instance, a mixture containing 10% clay powder treated at 800 °C exhibited compressive strength equivalent to the reference mortar with no waste material. In contrast, under the same conditions, the compressive strength of the mixture containing granite powder was 33% lower. These results indicate that identifying the type and characteristics of recycled materials is essential for their utilization and application of enhancement methodsThe study investigated the effects of construction waste powders exposed to elevated temperatures on the properties of cement mortar. The waste powders were obtained from demolished granite and clay blocks after more than 15 years of their service life. The exposure temperatures were 200 °C, 400 °C, 600 °C, and 800 °C. The heat-treated and untreated waste powders replaced cement in mortars at 10% and 20% by weight. The use of untreated recycled granite and clay powders adversely affected the mechanical strength and transport properties of the cementitious mixtures. On the other hand, the effects of thermal exposure varied for the two powder materials. As the exposure temperature increased, the performance of mixtures containing granite powder gradually deteriorated, while mixtures containing clay powder improved. The efficiency was both worst and best at 800 °C. For instance, a mixture containing 10% clay powder treated at 800 °C exhibited compressive strength equivalent to the reference mortar with no waste material. In contrast, under the same conditions, the compressive strength of the mixture containing granite powder was 33% lower. These results indicate that identifying the type and characteristics of recycled materials is essential for their utilization and application of enhancement methods.
Downloads
References
Akindahunsi, A. A., Avet, F., & Scrivener, K. (2020). The Influence of some calcined clays from Nigeria as clinker substitute in cementitious systems. Case Studies in Construction Materials, 13, e00443. https://doi.org/10.1016/j.cscm.2020.e00443
Angulo, S. C., Carrijo, P. M., Figueiredo, A. D., Chaves, A. P., & John, V. M. (2010). On the classification of mixed construction and demolition waste aggregate by porosity and its impact on the mechanical performance of concrete. Materials and Structures, 43(4), 519–528. https://doi.org/10.1617/s11527-009-9508-9
Aquino Rocha, J. H., & Toledo Filho, R. D. (2023). The utilization of recycled concrete powder as supplementary cementitious material in cement-based materials: A systematic literature review. Journal of Building Engineering, 76, 107319. https://doi.org/10.1016/j.jobe.2023.107319
Arif, R., Khitab, A., Kırgız, M. S., Khan, R. B. N., Tayyab, S., Khan, R. A., Anwar, W., & Arshad, M. T. (2021). Experimental analysis on partial replace-ment of cement with brick powder in concrete. Case Studies in Construction Materials, 15, e00749. https://doi.org/10.1016/j.cscm.2021.e00749
ASTM C305. (2020). Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plas-tic Consistency. ASTM International.
ASTM C618. (2022). Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. ASTM International.
ASTM C1437. (2020). Standard Test Method for Flow of Hydraulic Cement Mortar. ASTM International.
ASTM C1585. (2020). Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes. ASTM International.
Carriço, A., Bogas, J. A., & Guedes, M. (2020). Thermoactivated cementitious materials – A review. Construction and Building Materials, 250, 118873. https://doi.org/10.1016/j.conbuildmat.2020.118873
de Siqueira, A. A., & Cordeiro, G. C. (2022). Properties of binary and ternary mixes of cement, sugarcane bagasse ash and limestone. Construction and Building Materials, 317, 126150. https://doi.org/10.1016/j.conbuildmat.2021.126150
Duan, Z., Hou, S., Xiao, J., & Li, B. (2020). Study on the essential properties of recycled powders from construction and demolition waste. Journal of Cleaner Production, 253. https://doi.org/10.1016/j.jclepro.2019.119865
European Commission. (2018). Guidelines for the waste audits before demolition and renovation works of buildings.
Gleize, P. J. P., Cyr, M., & Escadeillas, G. (2007). Effects of metakaolin on autogenous shrinkage of cement pastes. Cement and Concrete Composites, 29(2), 80–87. https://doi.org/10.1016/j.cemconcomp.2006.09.005
He, C., Osbaeck, B., & Makovicky, E. (1995). Pozzolanic reactions of six principal clay minerals: Activation, reactivity assessments and technological effects. Cement and Concrete Research, 25(8), 1691–1702. https://doi.org/10.1016/0008-8846(95)00165-4
He, Z., Shen, A., Wu, H., Wang, W., Wang, L., Yao, C., & Wu, J. (2021). Research progress on recycled clay brick waste as an alternative to cement for sustainable construction materials. Construction and Building Materials, 274, 122113. https://doi.org/10.1016/J.CONBUILDMAT.2020.122113
Huang, Z., Zeng, W., Gu, Q., Wu, Y., Zhong, W., & Zhao, K. (2021). Investigations of variations in physical and mechanical properties of granite, sand-stone, and marble after temperature and acid solution treatments. Construction and Building Materials, 307, 124943. https://doi.org/10.1016/j.conbuildmat.2021.124943
Kim, J. (2021). Construction and demolition waste management in Korea: recycled aggregate and its application. Clean Technologies and Environmental Policy, 23, 2223–2234. https://doi.org/10.1007/s10098-021-02177-x
Kim, J., & Kim, N. (2022). Recycling Waste Paver Blocks in the Manufacture of New Concrete Paver Blocks and Building Bricks. Applied Sciences, 12(21), 10970. https://doi.org/10.3390/app122110970
Kim, J., & Kim, N. (2023). Exploring the role of thermal activation of cement exposed to the external environment on the improvement of concrete prop-erties. Journal of Materials Research and Technology. https://doi.org/10.1016/j.jmrt.2023.03.195
Kim, J., Lee, D., Sičáková, A., & Kim, N. (2023). Utilization of Different Forms of Demolished Clay Brick and Granite Wastes for Better Performance in Cement Composites. Buildings, 13(1), 165. https://doi.org/10.3390/buildings13010165
Kovářík, T., Bělský, P., Novotný, P., Říha, J., Savková, J., Medlín, R., Rieger, D., & Holba, P. (2015). Structural and physical changes of re-calcined me-takaolin regarding its reactivity. Construction and Building Materials, 80, 98–104. https://doi.org/10.1016/j.conbuildmat.2014.12.062
KS L5201. (2016). Portland cement. Korean Agency for Technology and Standards.
Li, L. G., Lin, Z. H., Chen, G. M., Kwan, A. K. H., & Li, Z. H. (2019). Reutilization of Clay Brick Waste in Mortar: Paste Replacement versus Cement Replacement. Journal of Materials in Civil Engineering, 31(7). https://doi.org/10.1061/(ASCE)MT.1943-5533.0002794
Likes, L., Markandeya, A., Haider, M. M., Bollinger, D., McCloy, J. S., & Nassiri, S. (2022). Recycled concrete and brick powders as supplements to Port-land cement for more sustainable concrete. Journal of Cleaner Production, 364, 132651. https://doi.org/10.1016/j.jclepro.2022.132651
Lu, L., Yang, Z., Lin, Y., & Dong, S. (2023). Partial replacement of manufactured sand with homologous granite powder in mortar: The effect on porosity and capillary water absorption. Construction and Building Materials, 376, 131031. https://doi.org/10.1016/j.conbuildmat.2023.131031
Ma, T., Zhu, G., Peng, N., Qiu, Y., Liu, Y., & Zou, J. (2021). Physical-mechanical properties and thermal-induced damage of granite after high-temperature pretreatment. Arabian Journal of Geosciences, 14(15), 1449. https://doi.org/10.1007/s12517-021-07870-1
Ma, Z., Yao, P., Yang, D., & Shen, J. (2021). Effects of fire-damaged concrete waste on the properties of its preparing recycled aggregate, recycled powder and newmade concrete. Journal of Materials Research and Technology, 15, 1030–1045. https://doi.org/10.1016/J.JMRT.2021.08.116
Mashaly, A. O., Shalaby, B. N., & Rashwan, M. A. (2018). Performance of mortar and concrete incorporating granite sludge as cement replacement. Construction and Building Materials, 169, 800–818. https://doi.org/10.1016/j.conbuildmat.2018.03.046
Montero, A., Tojo, Y., Matsuo, T., Matsuto, T., Yamada, M., Asakura, H., & Ono, Y. (2010). Gypsum and organic matter distribution in a mixed construc-tion and demolition waste sorting process and their possible removal from outputs. Journal of Hazardous Materials, 175(1–3), 747–753. https://doi.org/10.1016/j.jhazmat.2009.10.072
Ramadji, C., Messan, A., & Prud’Homme, E. (2020). Influence of Granite Powder on Physico-Mechanical and Durability Properties of Mortar. Materials, 13(23), 5406. https://doi.org/10.3390/ma13235406
Real, S., Carriço, A., Bogas, J. A., & Guedes, M. (2020). Influence of the Treatment Temperature on the Microstructure and Hydration Behavior of Ther-moactivated Recycled Cement. Materials, 13(18), 3937. https://doi.org/10.3390/ma13183937
Silva, R. V., de Brito, J., & Dhir, R. K. (2017). Availability and processing of recycled aggregates within the construction and demolition supply chain: A review. In Journal of Cleaner Production (Vol. 143, pp. 598–614). Elsevier Ltd. https://doi.org/10.1016/j.jclepro.2016.12.070
Silva, Y. F., & Delvasto, S. (2021). Sulfate attack resistance of self-compacting concrete with residue of masonry. Construction and Building Materials, 268, 121095. https://doi.org/10.1016/j.conbuildmat.2020.121095
Silva, Y. F., Delvasto, S., Izquierdo, S., & Araya-Letelier, G. (2021). Short and long-term physical and mechanical characterization of self-compacting concrete made with masonry and concrete residue. Construction and Building Materials, 312, 125382. https://doi.org/10.1016/j.conbuildmat.2021.125382
Silva, Y. F., Delvasto, S., Valencia, W., & Araya-Letelier, G. (2024). Performance of Self-Compacting Concrete with Residue of Masonry and Recycled Aggregate under Sulfate Attack. Journal of Materials in Civil En-gineering, 36(1). https://doi.org/10.1061/JMCEE7.MTENG-15741
Silva, Y. F., Lange, D. A., & Delvasto, S. (2019). Effect of incorporation of masonry residue on the properties of self-compacting concretes. Construction and Building Materials, 196, 277–283. https://doi.org/10.1016/j.conbuildmat.2018.11.132
Silva, Y. F., Lange, D. A., & Delvasto, S. (2020). Effects of the incorporation of residue of masonry on the properties of cementitious mortars. Revista de La Construcción, 19(3), 407–421.
Singh, S., Nagar, R., & Agrawal, V. (2016). A review on Properties of Sustainable Concrete using granite dust as replacement for river sand. Journal of Cleaner Production, 126, 74–87. https://doi.org/10.1016/J.JCLEPRO.2016.03.114
Tabana, L., Tichapondwa, S., Labuschagne, F., & Chirwa, E. (2020). Adsorption of Phenol from Wastewater Using Calcined Magnesium-Zinc-Aluminium Layered Double Hydroxide Clay. Sustainability, 12(10), 4273. https://doi.org/10.3390/su12104273
Tam, V. W. Y., Soomro, M., & Evangelista, A. C. J. (2018). A review of recycled aggregate in concrete applications (2000–2017). Construction and Build-ing Materials, 172, 272–292. https://doi.org/10.1016/j.conbuildmat.2018.03.240
Tam, V. W. Y., & Tam, C. M. (2007). Crushed aggregate production from centralized combined and individual waste sources in Hong Kong. Construction and Building Materials, 21(4), 879–886. https://doi.org/10.1016/j.conbuildmat.2005.12.016
Van der Molen, I. (1981). The shift of the α-β transition temperature of quartz associated with the thermal expansion of granite at high pressure. Tectono-physics, 73(4), 323–342. https://doi.org/10.1016/0040-1951(81)90221-3
Wu, H., Xiao, J., Liang, C., & Ma, Z. (2021). Properties of Cementitious Materials with Recycled Aggregate and Powder Both from Clay Brick Waste. Buildings, 11(3), 119. https://doi.org/10.3390/buildings11030119
Wu, H., Xu, J., Yang, D., & Ma, Z. (2021). Utilizing thermal activation treatment to improve the properties of waste cementitious powder and its newmade cementitious materials. Journal of Cleaner Production, 322, 129074. https://doi.org/10.1016/J.JCLEPRO.2021.129074
Xiao, J., Ma, Z., Sui, T., Akbarnezhad, A., & Duan, Z. (2018). Mechanical properties of concrete mixed with recycled powder produced from construction and demolition waste. Journal of Cleaner Production, 188, 720–731. https://doi.org/10.1016/j.jclepro.2018.03.277
Yang, D., Liu, M., Zhang, Z., Yao, P., & Ma, Z. (2022). Properties and modification of sustainable foam concrete including eco-friendly recycled powder from concrete waste. Case Studies in Construction Materials, 16, e00826. https://doi.org/10.1016/j.cscm.2021.e00826
Zhang, H., Zhang, B., Tang, L., & Zeng, W. (2023). Analysis of two processing techniques applied on powders from recycling of clay bricks and concrete, in terms of efficiency, energy consumption, and cost. Construction and Building Materials, 385, 131517. https://doi.org/10.1016/J.CONBUILDMAT.2023.131517
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Jeonghyun Kim, Donwoo Lee, Andrzej Ubysz
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
