Effects of the incorporation of residue of masonry on the properties of cementitious mortars
DOI:
https://doi.org/10.7764/rdlc.19.3.407-421Keywords:
Residue of masonry, supplementary cementitious material, pozzolan, hydration heat, shrinkageAbstract
This paper presents results of an experimental study of a residue of masonry (RM), sampled from a construction and demolition waste (CDW), added as a supplementary cementitious material (SCM) to partially replace up to 50% of Portland cement in the preparation of mortars. The pozzolanic activity (fixed lime and strength activity index), setting time, heat of hydration, the (autogenous and drying) shrinkage and compressive strength tests were carried out. The results show how the RM has a positive activity because the increase of RM replacement level in the mortars generates a lower heat of hydration and autogenous and drying shrinkage. The fixed lime at 28 and 180 days, indicating that the RM exhibits in some degree pozzolanic activity and the Strength Activity Index (SAI) was 77.13% and 84.36% of the compressive strength of 100% OPC mortar at the 7 and 28 days respectively, which conformed to ASTM C311. These results indicate that RM should be considered appropriated for using as a supplementary cementitious material.
Downloads
Download data is not yet available.
References
Ahmad, T., Ahmad, K., & Alam, M. (2018). Investigating calcined filter backwash solids as supplementary cementitious material for recycling in construction practices. Construction and Building Materials, 175, 664–671. https://doi.org/10.1016/J.CONBUILDMAT.2018.04.227
Akhtar, A., & Sarmah, A. K. (2018). Construction and demolition waste generation and properties of recycled aggregate concrete: A global perspective. Journal of Cleaner Production, 186, 262–281. https://doi.org/10.1016/J.JCLEPRO.2018.03.085
Baronio, G., & Binda, L. (1997). Study of the pozzolanicity of some bricks and clays. Construction and Building Materials, 11(1), 41–46. https://doi.org/10.1016/S0950-0618(96)00032-3
Bediako, M. (2018). Pozzolanic potentials and hydration behavior of ground waste clay brick obtained from clamp-firing technology. Case Studies in Construction Materials, 8, 1–7. https://doi.org/10.1016/J.CSCM.2017.11.003
Burrows, R. W. (1988). M-11: The Visible & Invisible Cracking of Concrete. Retrieved from https://www.concrete.org/publications/internationalconcreteabstractsportal/m/details/id/51683284
Carvalho, S. Z., Vernilli, F., Almeida, B., Oliveira, M. D., & Silva, S. N. (2018). Reducing environmental impacts: The use of basic oxygen furnace slag in portland cement. Journal of Cleaner Production, 172, 385–390. https://doi.org/10.1016/J.JCLEPRO.2017.10.130
Cheng, H. (2016). Reuse Research Progress on Waste Clay Brick. Procedia Environmental Sciences, 31, 218–226. https://doi.org/10.1016/J.PROENV.2016.02.029
Construction and demolition waste - Environment - European Commission. (2017). Retrieved October 3, 2019, from https://ec.europa.eu/environment/waste/construction_demolition.htm
Cyr, M., Lawrence, P., & Ringot, E. (2006). Efficiency of mineral admixtures in mortars: Quantification of the physical and chemical effects of fine admixtures in relation with compressive strength. Cement and Concrete Research, 36(2), 264–277. https://doi.org/10.1016/J.CEMCONRES.2005.07.001
De la Varga, I., Castro, J., Bentz, D. P., Zunino, F., & Weiss, J. (2018). Evaluating the hydration of high volume fly ash mixtures using chemically inert fillers. Construction and Building Materials, 161, 221–228. https://doi.org/10.1016/J.CONBUILDMAT.2017.11.132
de Oliveira Andrade, J. J., Possan, E., Squiavon, J. Z., & Ortolan T.L.P. (2018). Evaluation of mechanical properties and carbonation of mortars produced with construction and demolition waste. Construction and Building Materials, 161, 70–83. https://doi.org/10.1016/J.CONBUILDMAT.2017.11.089
Dellinghausen, L. M., Gastaldini, A. L., Vanzin, F. J., & Veiga, K. K. (2012). Total shrinkage, oxygen permeability, and chloride ion penetration in concrete made with white Portland cement and blast-furnace slag. Construction and Building Materials, 37, 652–659. https://doi.org/10.1016/J.CONBUILDMAT.2012.07.076
Frías, M., García, R., de la Villa, R. V., & Villar, E. (2013). The effect of binary pozzolan mix on the mineralogical changes in the ternary activated paper sludge–fly ash–Ca(OH)2 system. Construction and Building Materials, 38, 48–53. https://doi.org/10.1016/J.CONBUILDMAT.2012.08.045
Frías, M., Vigil de la Villa, R., García, R., Martínez-Ramírez, S., & Fernández-Carrasco, L. (2018). New developments in low clinker cement paste mineralogy. Applied Clay Science, 166, 94–101. https://doi.org/10.1016/J.CLAY.2018.09.009
Frølich, L., Wadsö, L., & Sandberg, P. (2016). Using isothermal calorimetry to predict one day mortar strengths. Cement and Concrete Research, 88, 108–113. https://doi.org/10.1016/J.CEMCONRES.2016.06.009
Gallucci, E., Zhang, X., & Scrivener, K. L. (2013). Effect of temperature on the microstructure of calcium silicate hydrate (C-S-H). Cement and Concrete Research, 53, 185–195. https://doi.org/10.1016/J.CEMCONRES.2013.06.008
Ge, Z., Wang, Y., Sun, R., Wu, X., & Guan, Y. (2015). Influence of ground waste clay brick on properties of fresh and hardened concrete. Construction and Building Materials, 98, 128–136. https://doi.org/10.1016/J.CONBUILDMAT.2015.08.100
Ghafari, E., Ghahari, S. A., Costa, H., Júlio, E., Portugal, A., & Durães, L. (2016). Effect of supplementary cementitious materials on autogenous shrinkage of ultra-high performance concrete. Construction and Building Materials, 127, 43–48. https://doi.org/10.1016/J.CONBUILDMAT.2016.09.123
Gmür, R., Thienel, K.-C., & Beuntner, N. (2016). Influence of aging conditions upon the properties of calcined clay and its performance as supplementary cementitious material. Cement and Concrete Composites, 72, 114–124. https://doi.org/10.1016/J.CEMCONCOMP.2016.05.020
Gutiérrez, A. S., Caballero Eras, J. J., Gaviria, C. A., Caneghem, J. V., & Vandecasteele, C. (2017). Improved selection of the functional unit in environmental impact assessment of cement. Journal of Cleaner Production, 168, 463–473. https://doi.org/10.1016/J.JCLEPRO.2017.09.007
Harbi, R., Derabla, R., & Nafa, Z. (2017). Improvement of the properties of a mortar with 5% of kaolin fillers in sand combined with metakaolin, brick waste and glass powder in cement. Construction and Building Materials, 152, 632–641. https://doi.org/10.1016/J.CONBUILDMAT.2017.07.062
Heikal, M., Zohdy, K. M., & Abdelkreem, M. (2013). Mechanical, microstructure and rheological characteristics of high performance self-compacting cement pastes and concrete containing ground clay bricks. Construction and Building Materials, 38, 101–109. https://doi.org/10.1016/J.CONBUILDMAT.2012.07.114
Hu, X., Shi, Z., Shi, C., Wu, Z., Tong, B., Ou, Z., & de Schutter, G. (2017). Drying shrinkage and cracking resistance of concrete made with ternary cementitious components. Construction and Building Materials, 149, 406–415. https://doi.org/10.1016/J.CONBUILDMAT.2017.05.113
Izquierdo, S., Diaz, J., Mejía, R., & Torres, J. (2013). Cemento adicionado con un residuo del proceso de craqueo catalítico (FCC): hidratación y microestructura. Revista Ingeniería de Construcción, 28(2), 141–154. https://doi.org/10.4067/S0718-50732013000200003
Jiang, C., Jin, C., Wang, Y., Yan, S., & Chen, D. (2018). Effect of heat curing treatment on the drying shrinkage behavior and microstructure characteristics of mortar incorporating different content ground granulated blast-furnace slag. Construction and Building Materials, 186, 379–387. https://doi.org/10.1016/J.CONBUILDMAT.2018.07.079
Juenger, M. C. G., & Siddique, R. (2015). Recent advances in understanding the role of supplementary cementitious materials in concrete. Cement and Concrete Research, 78, 71–80. https://doi.org/10.1016/J.CEMCONRES.2015.03.018
Juilland, P., Kumar, A., Gallucci, E., Flatt, R. J., & Scrivener, K. L. (2012). Effect of mixing on the early hydration of alite and OPC systems. Cement and Concrete Research, 42(9), 1175–1188. https://doi.org/10.1016/J.CEMCONRES.2011.06.011
Kartini, K., Rohaidah, Zuraini, & Za. (2012). Performance of Ground Clay Bricks as Partial Cement Replacement in Grade 30 Concrete. Retrieved from https://www.semanticscholar.org/paper/Performance-of-Ground-Clay-Bricks-as-Partial-Cement-Kartini-Rohaidah/826f9bff21da9fd99124dc3135ce79514df210ba
Li, H., Dong, L., Jiang, Z., Yang, X., & Yang, Z. (2016). Study on utilization of red brick waste powder in the production of cement-based red decorative plaster for walls. Journal of Cleaner Production, 133, 1017–1026. https://doi.org/10.1016/J.JCLEPRO.2016.05.149
Li, W., Lang, L., Lin, Z., Wang, Z., & Zhang, F. (2017). Characteristics of dry shrinkage and temperature shrinkage of cement-stabilized steel slag. Construction and Building Materials, 134, 540–548. https://doi.org/10.1016/J.CONBUILDMAT.2016.12.214
Lin, K.-L., Chen, B.-Y., Chiou, C.-S., & An Cheng. (2010). Waste brick’s potential for use as a pozzolan in blended Portland cement. Waste Management & Research, 28(7), 647–652. https://doi.org/10.1177/0734242X09355853
Liu, J., Ou, Z., Mo, J., Wang, Y., & Wu, H. (2017). The effect of SCMs and SAP on the autogenous shrinkage and hydration process of RPC. Construction and Building Materials, 155, 239–249. https://doi.org/10.1016/J.CONBUILDMAT.2017.08.061
Liu, P., Gao, Y., Wang, F., Yang, J., Yu, X., Zhang, W., & Lu, Y. (2017). Superhydrophobic and self-cleaning behavior of Portland cement with lotus-leaf-like microstructure. Journal of Cleaner Production, 156, 775–785. https://doi.org/10.1016/J.JCLEPRO.2017.03.211
Liu, S., Zhang, T., Guo, Y., Wei, J., & Yu, Q. (2018). Effects of SCMs particles on the compressive strength of micro-structurally designed cement paste: Inherent characteristic effect, particle size refinement effect, and hydration effect. Powder Technology, 330, 1–11. https://doi.org/10.1016/J.POWTEC.2018.01.087
Lura, P., Jensen, O. M., & van Breugel, K. (2003). Autogenous shrinkage in high-performance cement paste: An evaluation of basic mechanisms. Cement and Concrete Research, 33(2), 223–232. https://doi.org/10.1016/S0008-8846(02)00890-6
Ma, B., Zhang, T., Tan, H., Liu, X., Mei, J., Qi, H., … Zou, F. (2018). Effect of triisopropanolamine on compressive strength and hydration of cement-fly ash paste. Construction and Building Materials, 179, 89–99. https://doi.org/10.1016/J.CONBUILDMAT.2018.05.117
Maddalena, R., Roberts, J. J., & Hamilton, A. (2018). Can Portland cement be replaced by low-carbon alternative materials? A study on the thermal properties and carbon emissions of innovative cements. Journal of Cleaner Production, 186, 933–942. https://doi.org/10.1016/J.JCLEPRO.2018.02.138
Mashaly, A. O., El-Kaliouby, B. A., Shalaby, B. N., El – Gohary, A. M., & Rashwan, M. A. (2016). Effects of marble sludge incorporation on the properties of cement composites and concrete paving blocks. Journal of Cleaner Production, 112, 731–741. https://doi.org/10.1016/J.JCLEPRO.2015.07.023
Mohammed, S. (2017). Processing, effect and reactivity assessment of artificial pozzolans obtained from clays and clay wastes: A review. Construction and Building Materials, 140, 10–19. https://doi.org/10.1016/J.CONBUILDMAT.2017.02.078
Naceri, A., & Hamina, M. C. (2009). Use of waste brick as a partial replacement of cement in mortar. Waste Management, 29(8), 2378–2384. https://doi.org/10.1016/J.WASMAN.2009.03.026
Niewiadomski, P., Hoła, J., & Ćwirzeń, A. (2018). Study on properties of self-compacting concrete modified with nanoparticles. Archives of Civil and Mechanical Engineering, 18(3), 877–886. https://doi.org/10.1016/j.acme.2018.01.006
Payá, J., Monzó, J., Borrachero, M. ., & Velázquez, S. (2003). Evaluation of the pozzolanic activity of fluid catalytic cracking catalyst residue (FC3R). Thermogravimetric analysis studies on FC3R-Portland cement pastes. Cement and Concrete Research, 33(4), 603–609. https://doi.org/10.1016/S0008-8846(02)01026-8
Rezvani, M., & Proske, T. (2017). Influence of chemical-mineralogical properties of limestone on the shrinkage behaviour of cement paste and concrete made of limestone-rich cements. Construction and Building Materials, 157, 818–828. https://doi.org/10.1016/J.CONBUILDMAT.2017.09.101
Seco, A., Omer, J., Marcelino, S., Espuelas, S., & Prieto, E. (2018). Sustainable unfired bricks manufacturing from construction and demolition wastes. Construction and Building Materials, 167, 154–165. https://doi.org/10.1016/J.CONBUILDMAT.2018.02.026
Silva, Y. F., Robayo, R. A., Mattey, P. E., & Delvasto, S. (2016). Properties of self-compacting concrete on fresh and hardened with residue of masonry and recycled concrete. Construction and Building Materials, 124, 639–644. https://doi.org/10.1016/J.CONBUILDMAT.2016.07.057
Soriano, L., Monzó, J., Bonilla, M., Tashima, M. M., Payá, J., & Borrachero, M. V. (2013). Effect of pozzolans on the hydration process of Portland cement cured at low temperatures. Cement and Concrete Composites, 42, 41–48. https://doi.org/10.1016/J.CEMCONCOMP.2013.05.007
Suraneni, P., & Weiss, J. (2017). Examining the pozzolanicity of supplementary cementitious materials using isothermal calorimetry and thermogravimetric analysis. Cement and Concrete Composites, 83, 273–278. https://doi.org/10.1016/J.CEMCONCOMP.2017.07.009
Toledo Filho, R. D., Ghavami, K., Sanjuán, M. A., & England, G. L. (2005). Free, restrained and drying shrinkage of cement mortar composites reinforced with vegetable fibres. Cement and Concrete Composites, 27(5), 537–546. https://doi.org/10.1016/J.CEMCONCOMP.2004.09.005
Topçu, İ. B., Uygunoğlu, T., & Hocaoğlu, İ. (2012). Electrical conductivity of setting cement paste with different mineral admixtures. Construction and Building Materials, 28(1), 414–420. https://doi.org/10.1016/J.CONBUILDMAT.2011.08.068
Uchima, J. S., Restrepo, O. J., & Tobón, J. I. (2015). Pozzolanicity of the material obtained in the simultaneous calcination of biomass and kaolinitic clay. Construction and Building Materials, 95, 414–420. https://doi.org/10.1016/J.CONBUILDMAT.2015.07.104
Uysal, M., Akyuncu, V., Tanyildizi, H., Sumer, M., & Yildirim, H. (2019). Optimization of durability properties of concrete containing fly ash using Taguchi’s approach and Anova analysis. Revista de La Construcción, 17(3), 364–382. https://doi.org/10.7764/RDLC.17.3.364
Williams, A., Markandeya, A., Stetsko, Y., Riding, K., & Zayed, A. (2016). Cracking potential and temperature sensitivity of metakaolin concrete. Construction and Building Materials, 120, 172–180. https://doi.org/10.1016/J.CONBUILDMAT.2016.05.087
Wu, L., Farzadnia, N., Shi, C., Zhang, Z., & Wang, H. (2017a). Autogenous shrinkage of high performance concrete: A review. Construction and Building Materials, 149, 62–75. https://doi.org/10.1016/J.CONBUILDMAT.2017.05.064
Wu, L., Farzadnia, N., Shi, C., Zhang, Z., & Wang, H. (2017b). Autogenous shrinkage of high performance concrete: A review. Construction and Building Materials, 149, 62–75. https://doi.org/10.1016/J.CONBUILDMAT.2017.05.064
Yao, G., Liu, Q., Wang, J., Wu, P., & Lyu, X. (2019). Effect of mechanical grinding on pozzolanic activity and hydration properties of siliceous gold ore tailings. Journal of Cleaner Production, 217, 12–21. https://doi.org/10.1016/J.JCLEPRO.2019.01.175
Yousefieh, N., Joshaghani, A., Hajibandeh, E., & Shekarchi, M. (2017). Influence of fibers on drying shrinkage in restrained concrete. Construction and Building Materials, 148, 833–845. https://doi.org/10.1016/J.CONBUILDMAT.2017.05.093
Yuan, Q., Zhou, D., Li, B., Huang, H., & Shi, C. (2018). Effect of mineral admixtures on the structural build-up of cement paste. Construction and Building Materials, 160, 117–126. https://doi.org/10.1016/J.CONBUILDMAT.2017.11.050
Zeyad, A. M., Tayeh, B. A., & Yusuf, M. O. (2019). Strength and transport characteristics of volcanic pumice powder based high strength concrete. Construction and Building Materials, 216, 314–324. https://doi.org/10.1016/J.CONBUILDMAT.2019.05.026
Zheng, L., Wu, H., Zhang, H., Duan, H., Wang, J., Jiang, W., … Song, Q. (2017). Characterizing the generation and flows of construction and demolition waste in China. Construction and Building Materials, 136, 405–413. https://doi.org/10.1016/J.CONBUILDMAT.2017.01.055
Zhou, D., Wang, R., Tyrer, M., Wong, H., & Cheeseman, C. (2017). Sustainable infrastructure development through use of calcined excavated waste clay as a supplementary cementitious material. Journal of Cleaner Production, 168, 1180–1192. https://doi.org/10.1016/J.JCLEPRO.2017.09.098
Akhtar, A., & Sarmah, A. K. (2018). Construction and demolition waste generation and properties of recycled aggregate concrete: A global perspective. Journal of Cleaner Production, 186, 262–281. https://doi.org/10.1016/J.JCLEPRO.2018.03.085
Baronio, G., & Binda, L. (1997). Study of the pozzolanicity of some bricks and clays. Construction and Building Materials, 11(1), 41–46. https://doi.org/10.1016/S0950-0618(96)00032-3
Bediako, M. (2018). Pozzolanic potentials and hydration behavior of ground waste clay brick obtained from clamp-firing technology. Case Studies in Construction Materials, 8, 1–7. https://doi.org/10.1016/J.CSCM.2017.11.003
Burrows, R. W. (1988). M-11: The Visible & Invisible Cracking of Concrete. Retrieved from https://www.concrete.org/publications/internationalconcreteabstractsportal/m/details/id/51683284
Carvalho, S. Z., Vernilli, F., Almeida, B., Oliveira, M. D., & Silva, S. N. (2018). Reducing environmental impacts: The use of basic oxygen furnace slag in portland cement. Journal of Cleaner Production, 172, 385–390. https://doi.org/10.1016/J.JCLEPRO.2017.10.130
Cheng, H. (2016). Reuse Research Progress on Waste Clay Brick. Procedia Environmental Sciences, 31, 218–226. https://doi.org/10.1016/J.PROENV.2016.02.029
Construction and demolition waste - Environment - European Commission. (2017). Retrieved October 3, 2019, from https://ec.europa.eu/environment/waste/construction_demolition.htm
Cyr, M., Lawrence, P., & Ringot, E. (2006). Efficiency of mineral admixtures in mortars: Quantification of the physical and chemical effects of fine admixtures in relation with compressive strength. Cement and Concrete Research, 36(2), 264–277. https://doi.org/10.1016/J.CEMCONRES.2005.07.001
De la Varga, I., Castro, J., Bentz, D. P., Zunino, F., & Weiss, J. (2018). Evaluating the hydration of high volume fly ash mixtures using chemically inert fillers. Construction and Building Materials, 161, 221–228. https://doi.org/10.1016/J.CONBUILDMAT.2017.11.132
de Oliveira Andrade, J. J., Possan, E., Squiavon, J. Z., & Ortolan T.L.P. (2018). Evaluation of mechanical properties and carbonation of mortars produced with construction and demolition waste. Construction and Building Materials, 161, 70–83. https://doi.org/10.1016/J.CONBUILDMAT.2017.11.089
Dellinghausen, L. M., Gastaldini, A. L., Vanzin, F. J., & Veiga, K. K. (2012). Total shrinkage, oxygen permeability, and chloride ion penetration in concrete made with white Portland cement and blast-furnace slag. Construction and Building Materials, 37, 652–659. https://doi.org/10.1016/J.CONBUILDMAT.2012.07.076
Frías, M., García, R., de la Villa, R. V., & Villar, E. (2013). The effect of binary pozzolan mix on the mineralogical changes in the ternary activated paper sludge–fly ash–Ca(OH)2 system. Construction and Building Materials, 38, 48–53. https://doi.org/10.1016/J.CONBUILDMAT.2012.08.045
Frías, M., Vigil de la Villa, R., García, R., Martínez-Ramírez, S., & Fernández-Carrasco, L. (2018). New developments in low clinker cement paste mineralogy. Applied Clay Science, 166, 94–101. https://doi.org/10.1016/J.CLAY.2018.09.009
Frølich, L., Wadsö, L., & Sandberg, P. (2016). Using isothermal calorimetry to predict one day mortar strengths. Cement and Concrete Research, 88, 108–113. https://doi.org/10.1016/J.CEMCONRES.2016.06.009
Gallucci, E., Zhang, X., & Scrivener, K. L. (2013). Effect of temperature on the microstructure of calcium silicate hydrate (C-S-H). Cement and Concrete Research, 53, 185–195. https://doi.org/10.1016/J.CEMCONRES.2013.06.008
Ge, Z., Wang, Y., Sun, R., Wu, X., & Guan, Y. (2015). Influence of ground waste clay brick on properties of fresh and hardened concrete. Construction and Building Materials, 98, 128–136. https://doi.org/10.1016/J.CONBUILDMAT.2015.08.100
Ghafari, E., Ghahari, S. A., Costa, H., Júlio, E., Portugal, A., & Durães, L. (2016). Effect of supplementary cementitious materials on autogenous shrinkage of ultra-high performance concrete. Construction and Building Materials, 127, 43–48. https://doi.org/10.1016/J.CONBUILDMAT.2016.09.123
Gmür, R., Thienel, K.-C., & Beuntner, N. (2016). Influence of aging conditions upon the properties of calcined clay and its performance as supplementary cementitious material. Cement and Concrete Composites, 72, 114–124. https://doi.org/10.1016/J.CEMCONCOMP.2016.05.020
Gutiérrez, A. S., Caballero Eras, J. J., Gaviria, C. A., Caneghem, J. V., & Vandecasteele, C. (2017). Improved selection of the functional unit in environmental impact assessment of cement. Journal of Cleaner Production, 168, 463–473. https://doi.org/10.1016/J.JCLEPRO.2017.09.007
Harbi, R., Derabla, R., & Nafa, Z. (2017). Improvement of the properties of a mortar with 5% of kaolin fillers in sand combined with metakaolin, brick waste and glass powder in cement. Construction and Building Materials, 152, 632–641. https://doi.org/10.1016/J.CONBUILDMAT.2017.07.062
Heikal, M., Zohdy, K. M., & Abdelkreem, M. (2013). Mechanical, microstructure and rheological characteristics of high performance self-compacting cement pastes and concrete containing ground clay bricks. Construction and Building Materials, 38, 101–109. https://doi.org/10.1016/J.CONBUILDMAT.2012.07.114
Hu, X., Shi, Z., Shi, C., Wu, Z., Tong, B., Ou, Z., & de Schutter, G. (2017). Drying shrinkage and cracking resistance of concrete made with ternary cementitious components. Construction and Building Materials, 149, 406–415. https://doi.org/10.1016/J.CONBUILDMAT.2017.05.113
Izquierdo, S., Diaz, J., Mejía, R., & Torres, J. (2013). Cemento adicionado con un residuo del proceso de craqueo catalítico (FCC): hidratación y microestructura. Revista Ingeniería de Construcción, 28(2), 141–154. https://doi.org/10.4067/S0718-50732013000200003
Jiang, C., Jin, C., Wang, Y., Yan, S., & Chen, D. (2018). Effect of heat curing treatment on the drying shrinkage behavior and microstructure characteristics of mortar incorporating different content ground granulated blast-furnace slag. Construction and Building Materials, 186, 379–387. https://doi.org/10.1016/J.CONBUILDMAT.2018.07.079
Juenger, M. C. G., & Siddique, R. (2015). Recent advances in understanding the role of supplementary cementitious materials in concrete. Cement and Concrete Research, 78, 71–80. https://doi.org/10.1016/J.CEMCONRES.2015.03.018
Juilland, P., Kumar, A., Gallucci, E., Flatt, R. J., & Scrivener, K. L. (2012). Effect of mixing on the early hydration of alite and OPC systems. Cement and Concrete Research, 42(9), 1175–1188. https://doi.org/10.1016/J.CEMCONRES.2011.06.011
Kartini, K., Rohaidah, Zuraini, & Za. (2012). Performance of Ground Clay Bricks as Partial Cement Replacement in Grade 30 Concrete. Retrieved from https://www.semanticscholar.org/paper/Performance-of-Ground-Clay-Bricks-as-Partial-Cement-Kartini-Rohaidah/826f9bff21da9fd99124dc3135ce79514df210ba
Li, H., Dong, L., Jiang, Z., Yang, X., & Yang, Z. (2016). Study on utilization of red brick waste powder in the production of cement-based red decorative plaster for walls. Journal of Cleaner Production, 133, 1017–1026. https://doi.org/10.1016/J.JCLEPRO.2016.05.149
Li, W., Lang, L., Lin, Z., Wang, Z., & Zhang, F. (2017). Characteristics of dry shrinkage and temperature shrinkage of cement-stabilized steel slag. Construction and Building Materials, 134, 540–548. https://doi.org/10.1016/J.CONBUILDMAT.2016.12.214
Lin, K.-L., Chen, B.-Y., Chiou, C.-S., & An Cheng. (2010). Waste brick’s potential for use as a pozzolan in blended Portland cement. Waste Management & Research, 28(7), 647–652. https://doi.org/10.1177/0734242X09355853
Liu, J., Ou, Z., Mo, J., Wang, Y., & Wu, H. (2017). The effect of SCMs and SAP on the autogenous shrinkage and hydration process of RPC. Construction and Building Materials, 155, 239–249. https://doi.org/10.1016/J.CONBUILDMAT.2017.08.061
Liu, P., Gao, Y., Wang, F., Yang, J., Yu, X., Zhang, W., & Lu, Y. (2017). Superhydrophobic and self-cleaning behavior of Portland cement with lotus-leaf-like microstructure. Journal of Cleaner Production, 156, 775–785. https://doi.org/10.1016/J.JCLEPRO.2017.03.211
Liu, S., Zhang, T., Guo, Y., Wei, J., & Yu, Q. (2018). Effects of SCMs particles on the compressive strength of micro-structurally designed cement paste: Inherent characteristic effect, particle size refinement effect, and hydration effect. Powder Technology, 330, 1–11. https://doi.org/10.1016/J.POWTEC.2018.01.087
Lura, P., Jensen, O. M., & van Breugel, K. (2003). Autogenous shrinkage in high-performance cement paste: An evaluation of basic mechanisms. Cement and Concrete Research, 33(2), 223–232. https://doi.org/10.1016/S0008-8846(02)00890-6
Ma, B., Zhang, T., Tan, H., Liu, X., Mei, J., Qi, H., … Zou, F. (2018). Effect of triisopropanolamine on compressive strength and hydration of cement-fly ash paste. Construction and Building Materials, 179, 89–99. https://doi.org/10.1016/J.CONBUILDMAT.2018.05.117
Maddalena, R., Roberts, J. J., & Hamilton, A. (2018). Can Portland cement be replaced by low-carbon alternative materials? A study on the thermal properties and carbon emissions of innovative cements. Journal of Cleaner Production, 186, 933–942. https://doi.org/10.1016/J.JCLEPRO.2018.02.138
Mashaly, A. O., El-Kaliouby, B. A., Shalaby, B. N., El – Gohary, A. M., & Rashwan, M. A. (2016). Effects of marble sludge incorporation on the properties of cement composites and concrete paving blocks. Journal of Cleaner Production, 112, 731–741. https://doi.org/10.1016/J.JCLEPRO.2015.07.023
Mohammed, S. (2017). Processing, effect and reactivity assessment of artificial pozzolans obtained from clays and clay wastes: A review. Construction and Building Materials, 140, 10–19. https://doi.org/10.1016/J.CONBUILDMAT.2017.02.078
Naceri, A., & Hamina, M. C. (2009). Use of waste brick as a partial replacement of cement in mortar. Waste Management, 29(8), 2378–2384. https://doi.org/10.1016/J.WASMAN.2009.03.026
Niewiadomski, P., Hoła, J., & Ćwirzeń, A. (2018). Study on properties of self-compacting concrete modified with nanoparticles. Archives of Civil and Mechanical Engineering, 18(3), 877–886. https://doi.org/10.1016/j.acme.2018.01.006
Payá, J., Monzó, J., Borrachero, M. ., & Velázquez, S. (2003). Evaluation of the pozzolanic activity of fluid catalytic cracking catalyst residue (FC3R). Thermogravimetric analysis studies on FC3R-Portland cement pastes. Cement and Concrete Research, 33(4), 603–609. https://doi.org/10.1016/S0008-8846(02)01026-8
Rezvani, M., & Proske, T. (2017). Influence of chemical-mineralogical properties of limestone on the shrinkage behaviour of cement paste and concrete made of limestone-rich cements. Construction and Building Materials, 157, 818–828. https://doi.org/10.1016/J.CONBUILDMAT.2017.09.101
Seco, A., Omer, J., Marcelino, S., Espuelas, S., & Prieto, E. (2018). Sustainable unfired bricks manufacturing from construction and demolition wastes. Construction and Building Materials, 167, 154–165. https://doi.org/10.1016/J.CONBUILDMAT.2018.02.026
Silva, Y. F., Robayo, R. A., Mattey, P. E., & Delvasto, S. (2016). Properties of self-compacting concrete on fresh and hardened with residue of masonry and recycled concrete. Construction and Building Materials, 124, 639–644. https://doi.org/10.1016/J.CONBUILDMAT.2016.07.057
Soriano, L., Monzó, J., Bonilla, M., Tashima, M. M., Payá, J., & Borrachero, M. V. (2013). Effect of pozzolans on the hydration process of Portland cement cured at low temperatures. Cement and Concrete Composites, 42, 41–48. https://doi.org/10.1016/J.CEMCONCOMP.2013.05.007
Suraneni, P., & Weiss, J. (2017). Examining the pozzolanicity of supplementary cementitious materials using isothermal calorimetry and thermogravimetric analysis. Cement and Concrete Composites, 83, 273–278. https://doi.org/10.1016/J.CEMCONCOMP.2017.07.009
Toledo Filho, R. D., Ghavami, K., Sanjuán, M. A., & England, G. L. (2005). Free, restrained and drying shrinkage of cement mortar composites reinforced with vegetable fibres. Cement and Concrete Composites, 27(5), 537–546. https://doi.org/10.1016/J.CEMCONCOMP.2004.09.005
Topçu, İ. B., Uygunoğlu, T., & Hocaoğlu, İ. (2012). Electrical conductivity of setting cement paste with different mineral admixtures. Construction and Building Materials, 28(1), 414–420. https://doi.org/10.1016/J.CONBUILDMAT.2011.08.068
Uchima, J. S., Restrepo, O. J., & Tobón, J. I. (2015). Pozzolanicity of the material obtained in the simultaneous calcination of biomass and kaolinitic clay. Construction and Building Materials, 95, 414–420. https://doi.org/10.1016/J.CONBUILDMAT.2015.07.104
Uysal, M., Akyuncu, V., Tanyildizi, H., Sumer, M., & Yildirim, H. (2019). Optimization of durability properties of concrete containing fly ash using Taguchi’s approach and Anova analysis. Revista de La Construcción, 17(3), 364–382. https://doi.org/10.7764/RDLC.17.3.364
Williams, A., Markandeya, A., Stetsko, Y., Riding, K., & Zayed, A. (2016). Cracking potential and temperature sensitivity of metakaolin concrete. Construction and Building Materials, 120, 172–180. https://doi.org/10.1016/J.CONBUILDMAT.2016.05.087
Wu, L., Farzadnia, N., Shi, C., Zhang, Z., & Wang, H. (2017a). Autogenous shrinkage of high performance concrete: A review. Construction and Building Materials, 149, 62–75. https://doi.org/10.1016/J.CONBUILDMAT.2017.05.064
Wu, L., Farzadnia, N., Shi, C., Zhang, Z., & Wang, H. (2017b). Autogenous shrinkage of high performance concrete: A review. Construction and Building Materials, 149, 62–75. https://doi.org/10.1016/J.CONBUILDMAT.2017.05.064
Yao, G., Liu, Q., Wang, J., Wu, P., & Lyu, X. (2019). Effect of mechanical grinding on pozzolanic activity and hydration properties of siliceous gold ore tailings. Journal of Cleaner Production, 217, 12–21. https://doi.org/10.1016/J.JCLEPRO.2019.01.175
Yousefieh, N., Joshaghani, A., Hajibandeh, E., & Shekarchi, M. (2017). Influence of fibers on drying shrinkage in restrained concrete. Construction and Building Materials, 148, 833–845. https://doi.org/10.1016/J.CONBUILDMAT.2017.05.093
Yuan, Q., Zhou, D., Li, B., Huang, H., & Shi, C. (2018). Effect of mineral admixtures on the structural build-up of cement paste. Construction and Building Materials, 160, 117–126. https://doi.org/10.1016/J.CONBUILDMAT.2017.11.050
Zeyad, A. M., Tayeh, B. A., & Yusuf, M. O. (2019). Strength and transport characteristics of volcanic pumice powder based high strength concrete. Construction and Building Materials, 216, 314–324. https://doi.org/10.1016/J.CONBUILDMAT.2019.05.026
Zheng, L., Wu, H., Zhang, H., Duan, H., Wang, J., Jiang, W., … Song, Q. (2017). Characterizing the generation and flows of construction and demolition waste in China. Construction and Building Materials, 136, 405–413. https://doi.org/10.1016/J.CONBUILDMAT.2017.01.055
Zhou, D., Wang, R., Tyrer, M., Wong, H., & Cheeseman, C. (2017). Sustainable infrastructure development through use of calcined excavated waste clay as a supplementary cementitious material. Journal of Cleaner Production, 168, 1180–1192. https://doi.org/10.1016/J.JCLEPRO.2017.09.098
Downloads
Published
2020-12-25
How to Cite
Silva, Y. F., Lange, D. A., & Delvasto, S. (2020). Effects of the incorporation of residue of masonry on the properties of cementitious mortars. Revista De La Construcción. Journal of Construction, 19(3), 407–421. https://doi.org/10.7764/rdlc.19.3.407-421
Issue
Section
Research article
