Properties of concrete having treated recycled coarse aggregate and slag
DOI:
https://doi.org/10.7764/RDLC.20.2.249Keywords:
treated recycled coarse aggregate, untreated recycled coarse aggregate, slag, HCl, molarityAbstract
The possibility of using substitute materials for aggregates and cement in concrete were studied and reported in this paper. Concrete mixtures with untreated recycled coarse aggregates (URCA) and treated recycled coarse aggregates (TRCA) were used to prepare two mix groups of without slag (Mix I) and with slag (Mix II). The recycled aggregates were treated with hydrochloric acid (HCl) having different molarities (0.1M, 0.3M and 0.5M) before used as a substitute material for virgin aggregate in concrete. The concrete mechanical, durability properties and morphology of concrete were examined through standard experiments and analysed. In both mix groups considerable improvement in all characteristics were identified in TRCA mixes than URCA mixes. Among the two mix groups the concrete mix with slag (Mix II) showed better durability characteristics than mix without slag (Mix I). The combination of TRCA and slag in concrete substantially increases the characteristics of concrete in all means.
Downloads
References
AASHTO T277-86. 1990. Rapid determination of the chloride permeability of concrete, American Association of States Highway and Transportation Officials, Standard Specifications - Part II Tests, Washington, D. C.
ACI Committee 233. 2003. “Ground granulated blast-furnace slag as a cementitious constituent in concrete”, ACI 233 R-03, American Concrete Institute, Farmington Hills, MI, USA.
ASTM C143 / C143M-20, Standard test method for slump of hydraulic-cement concrete, ASTM International, West Conshohocken, PA, 2020, www.astm.org
ASTM C150/C150M-16e1. 2020. Standard specification for portland cement, ASTM International, West Conshohocken, PA.
ASTM C496/496-M-11. 2020. Standard test method for splitting tensile strength of cylindrical concrete specimens, ASTM International, West Conshohocken, PA.
ASTM C1585. 2011. Standard test method for measurement of rate of absorption of water by hydraulic-cement concretes. ASTM International, West Conshohocken, PA.
ASTM C1202. 2015. Standard test method for electrical indication of concrete's ability to resist chloride ion penetration. ASTM International, West Conshohocken, PA.
BS1881-116 1983. Testing concrete. Method for determination of compressive strength of concrete cubes, British Standard Institution, London.
BS EN 12350-1:2019. Testing fresh concrete. Sampling and common apparatus, British Standard Institution, London.
Chen, J., Thomas, J., Taylor, H., & Jennings, H. (2004). Solubility and structure of calcium silicate hydrate. Cement and Concrete Research, 34(9), 1499-1519.
Deschner, F., Winnefeld, B., Lothenbach, S., Seufert, P., Schwesig, S., Dittrich, F., Goetz-Neunhoeffer, J., & Neubauer. (2012). Hydration of portland cement with high replacement by siliceous fly ash. Cement and Concrete Research, 42, 1389–1400.
Elahi, A., Basheer, P. A. M., Nanukuttan, S. V., & Khan, Q. U. Z. (2010). Mechanical and durability properties of high performance concrete containing supplementary cementitious materials. Construction and Building Materials, 24(3), 292-299.
Hansen, T. C., & Narud, H. (1983). Strength of recycled concrete made from crushed concrete coarse aggregate. Concrete International: Design and Construction, 5(1): 79–83.
Jalilifar, H., Sajedi, F., & Toosi, V. R. (2020). Evaluating the durability of recycled concrete made of coarse recycled aggregate concrete containing silica-fume and natural zeolite. Revista de la Construcción. Journal of Construction, 19(3), 457-473.
Kou, S. C., Poon, C. S., & Agrela, F. (2011). Comparisons of natural and recycled aggregate concretes prepared with the addition of different mineral admixtures. Cement and Concrete Composites, 33, 788-795.
Kou S. C, & Poon C. S. (2013). Long-term mechanical and durability properties of recycled aggregate concrete prepared with the incorporation of fly ash. Cement and Concrete Composites, 37, 12–19.
Li, J. S., Xiao, H. N., & Zhou, Y. (2009). Influence of coating recycled aggregate surface with pozzolanic powder on properties of recycled aggregate concrete. Construction and Building Materials, 23(3), 1287–1291.
Miller, S.A., & Moore, F.C. (2020). Climate and health damages from global concrete production. Nature Climate Change, 10, 439–443.
Ong K. C. G., Ali A., Zhang M. H., Tam C. T., Hao J., & Timothy W. J. F. (2010). Mechanical properties of concrete incorporating microwave-treated recycled concrete aggregates. In proceedings of the 35th Conference on Our World in Concrete & Structure, Singapore. Article Online Id: 100035004.
Padmini, A. K., Ramamurthy, K., & Mathews, M. S. (2009). Influence of parent concrete on the properties of recycled aggregate concrete. Construction and Building Materials, 23(2), 829-836.
Revathi P., Ramesh R., Amirthavalli & Lavanya K. (2015). Influence of Treatment Methods on the Strength and Performance Characteristics of Recycled Aggregate Concrete. Journal of Materials in Civil Engineering, 27(5), 04014168.
RILEM TC 121 DRG. (1994). Recommendation: specification for concrete with recycled aggregates. Materials and Structures, 27(173), 557-559.
Ryou, J. S., & Lee, Y. S., (2014). Characterization of Recycled Coarse Aggregate (RCA) via a Surface Coating Method. International Journal of Concrete Structures and Materials, 8(2), 165–172.
Sallehan, I., & Mahyuddin, R. (2013). Engineering properties of treated recycled concrete aggregate (RCA) for structural applications. Construction and Building Materials, 44, 464–476.
Saravanakumar, P., & Dhinakaran, G. (2012). Effect of admixed recycled aggregate concrete on properties of fresh and hardened concrete. Journal of Materials in Civil Engineering, 24(4), 494 – 498.
Saravanakumar, P., & Dhinakaran, G. (2013). Strength characteristics of high-volume fly ash–based recycled aggregate concrete. Journal of Materials in Civil Engineering, 25(8), 1127 – 1133.
Saravanakumar, P., Dhinakaran, G., & Marimuthu, K. (2014). Performance of Sustainable Concrete containing HVFA and RCA. Asian Journal of Applied Sciences, 7(4), 194 – 204.
Saravanakumar, P., and Dhinakaran, G. (2015). Mechanical and Durability properties of slag based recycled aggregate concrete. IJST, Transactions of Civil Engineering, 39(C2), 271-282.
Saravanakumar, P., Abhiram, K., & Manoj, B. (2016). Properties of treated recycled aggregates and its influence on concrete strength characteristics. Construction and Building Materials, 111, 611-617.
Sharma, R. (2017). Laboratory Study on Effect of Construction Wastes and Admixtures on Compressive Strength of Concrete. Arabian Journal for Science and Engineering, 42, 3945 – 3962.
Sivamani J., Neelakantan T.R., Saravana Kumar P., Mugesh Kanna C., Vignesh Harish H., & Akash M.R. (2021). Efficient Utilization of Recycled Concrete Aggregates for Structural Applications—An Experimental Study. Lecture Notes in Civil Engineering, 97, Springer, Cham.
Taboada, G. I., Fonteboa, G. B., Abella, M. F., & Lopez, C. D. (2016). Study of recycled concrete aggregate quality and its relationship with recycled concrete compressive strength using database analysis. Materiales de Construcción, 66(323), 10.3989/mc.2016.06415.
Tam, V. W. Y., Tam, C. M., & Le, K. N. (2007). Removal of cement mortar remains from recycled aggregate using pre-soaking approaches. Resources, Conservation and Recycling, 50(1), 82-101.
Tam, V. W. Y., Soomro, M., & Evangelista, A. C. J. (2018). A review of recycled aggregate in concrete applications (2000–2017). Construction and Building Materials, 172, 272–292.
Yu-chang, L., Zheng-mao, Y., Franck, V., & Yunping, Xi. (2015). Development of Processing Methods to Improve Strength of Concrete with 100% Recycled Coarse Aggregate. Journal of Materials in Civil Engineering, 27(5), 04014163.
Zhang, S. P., & Zong, L. (2014). Evaluation of Relationship between Water Absorption and Durability of Concrete Materials. Advances in Materials Science and Engineering, 2014: Article ID 650373, https://doi.org/10.1155/2014/650373
